Thread: Rear cup holder removal

I considered doing that but in the end went with under the passenger seat.
The image below is from the WSM, showing two tabs to push down.

The part number is FJI500032PVJ, google for photos, eg
Land Rover Discovery 3 New Genuine Rear Centre Console Cup Holder FJI500032PVJ | eBay
2006 Land Rover Range Rover Sport Cup Holder Rear Cup Holder FJI500032PVJ


Cheers,
Scott

Could you mount it in the space under the air vents? That's normally where all the inputs for the rear seat entertainment go so if you don't have that perhaps it's an option? Not too sure how deep it would be though?

Originally Posted by LRD414

I considered doing that but in the end went with under the passenger seat.

Thx Scott. I assume you had to remove the passenger seat to do this?

Originally Posted by laughto

Thx Scott. I assume you had to remove the passenger seat to do this?

You can get decent access to that area just by raising the seat to maximum height and sliding it forward. Shouldn't need to remove seat.

There's a nice bracket under there, used for surround camera system (when you have one).



Yet another excellent write-up with pics by Scott here: http://www.aulro.com/afvb/members-ri...ery-4-a-8.html

David

Originally Posted by l00kin4

You can get decent access to that area just by raising the seat to maximum height and sliding it forward. Shouldn't need to remove seat.

There's a nice bracket under there, used for surround camera system (when you have one).



Yet another excellent write-up with pics by Scott here: Scott's Discovery 4

David

Beautiful, and relatively easy access.

Why not mount the RF unit under the front passenger seat. If you remove the current empty bracket and fit it with a new bracket, you have a great secure point.

Access is by forwarding the seat.

My install is perfect in that position.

Originally Posted by VK3GJM

Why not mount the RF unit under the front passenger seat. If you remove the current empty bracket and fit it with a new bracket, you have a great secure point.

Access is by forwarding the seat.

My install is perfect in that position.

Yep, yep looks the part.