Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 31

Thread: My D3 hates Towing

  1. #11
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    2,248
    Total Downloaded
    0
    Quote Originally Posted by DonDownunder View Post
    some pics
    If you replaced the engine then you surely would know whether it is remapped or not? As for a chip, it's unlikely the fitters would re-establish a chip without asking you?

    Cheers

    Gordon

  2. #12
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0

    My D3 hates Towing

    Don, out of curiosity I had a sift in Disco3 for your fault codes, particularly P0087 and P2299.

    P0087 could be related to a fuel pump or fuel filter issue but if so, is usually associated with P2290, which seems the more common code and you don't have that one.

    However, P0087 has also been associated with the brake pedal switch issue and this cause would line up with your P2299 code.

    So if it's not related to a chip, then the suggestion of changing the brake pedal switch and checking all brake bulbs is worth doing.

    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  3. #13
    Join Date
    Jan 2015
    Location
    Penrith
    Posts
    65
    Total Downloaded
    0
    Quote Originally Posted by LRD414 View Post
    Don, out of curiosity I had a sift in Disco3 for your fault codes, particularly P0087 and P2299.

    P0087 could be related to a fuel pump or fuel filter issue but if so, is usually associated with P2290, which seems the more common code and you don't have that one.

    However, P0087 has also been associated with the brake pedal switch issue and this cause would line up with your P2299 code.

    So if it's not related to a chip, then the suggestion of changing the brake pedal switch and checking all brake bulbs is worth doing.

    Scott
    Thanks Scott. There is no performance Chip and I found 2 blackened brake bulbs . Brake switch working ok as it signals the Brake Controller for the Caravan.I am not sure of the lineup of the signal to the brake controller as it was fitted by previous owner. I always double relay the brake switch signal with polarized diode within the relay to protect computer circuits. cheers Don

  4. #14
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0

    My D3 hates Towing

    Quote Originally Posted by DonDownunder View Post
    Thanks Scott. There is no performance Chip and I found 2 blackened brake bulbs . Brake switch working ok as it signals the Brake Controller for the Caravan.
    Well that's the first thing to rectify Don. Regarding the switch, it seems that when faulty it is intermittent so may not affect your brake controller in an obvious way. Also the recommended way to wire the brake controller signal is spliced to the stop light wire rather than brake switch. Not sure if that's relevant to your problem though. Hopefully it's the bulbs.

    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  5. #15
    Join Date
    Jan 2015
    Location
    Penrith
    Posts
    65
    Total Downloaded
    0
    Thanks for help guys. When we were on the road last week was afterdark and 2 separate cars dooted the horn and flashed headlights behind us and we took no notice, Well today after suggestions I found 2 partially blackened tail and brake bulbs in rear lights which could be the culprit to the Limp Mode (hoping it is) as the tail lights may of been flickering off and on, Bulbs replaced so this Tuesday head off with caravan again.
    The other contributing item could be the logic in the brake controller signal wiring. If it is sourced from the tow connection at the back should be ok but was in the D3 when I bought it.

  6. #16
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Quote Originally Posted by DonDownunder View Post
    Bulbs replaced so this Tuesday head off with caravan again.
    The other contributing item could be the logic in the brake controller signal wiring. If it is sourced from the tow connection at the back should be ok but was in the D3 when I bought it.
    Don, also worth looking at fitting LED bulbs as per this thread. Then you are unlikely to face this issue again.
    http://www.aulro.com/afvb/d3-d4-rrs/...l-blinker.html
    Given you're leaving Tuesday have a look at Jaycar for them. Or at least take spare standard bulbs with you.
    I would be sourcing a spare new brake light switch to carry as well. They are pretty cheap insurance.

    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  7. #17
    Tombie Guest
    Brake light switch is MUCH cheaper from Ford Dealers.

  8. #18
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    Brake light switch is MUCH cheaper from Ford Dealers.
    Which do you ask for oh wise one???
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  9. #19
    Join Date
    Aug 2015
    Location
    Coolamon, NSW
    Posts
    783
    Total Downloaded
    0
    Quote Originally Posted by LandyAndy View Post
    Which do you ask for oh wise one???
    Andrew
    AFAIK they have the same part number
    - Justin
    Selling soon - MY10 D4 3.0 TDV6 SE with E-Diff & LLAMS, 265/65R18 Maxxis Razr A/T
    Moved into MY12 L322 4.4 TDV8 Autobiography
    VK2HFJ

  10. #20
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    It wont be listed as a Discovery brake switch,I would be surprised if every Ford used the same switch.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

Page 2 of 4 FirstFirst 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!