See a panel shop,get a price to have yours painted
OR DIY
Andrew
Hi all,
I am just being ridiculous I know.
But...
I have ordered GOE 18s in black, just received black centre caps and black wheel nuts to go with the black D4. I can get black badges and air vents ( even though I only need one cos I have a black snorkel) for a reasonable price online. Today I booked in for tinting.
Does anybody know where to get a black grille? There are plenty on offer for pre facelift models (up to 2013), but with copious searching I have not been able to find anything for 2014 on.
Cheers
Mike
See a panel shop,get a price to have yours painted
OR DIY
Andrew
DISCOVERY IS TO BE DISOWNED
Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
Snow White MY14 TDV6 D4
Alotta Fagina MY14 CAT 12M Motor Grader
2003 Stacer 525 Sea Master Sport
I made the 1 millionth AULRO post
Thanks Andrew,
I am considering that. But it is also a new can of worms, best type of paint, application method etc
Cheers
Mike
Plastidip - that way you can restore it to factory if you want.
2014 SDV6 HSE - LLAMS, Tuff Ant Tree Sliders, Tuff Ant 18" rims, Nitto Ridge Grappler tyres 265/65 R18, Custom Lipo4 battery, Custom Drawer storage system https://www.box.com/s/jem0ilac3cner2mexq64
How about this?
Search LR4 (rather than Discovery) on ebay
Black Front Grille Honey Comb Mesh Grill FOR Land Rover Discovery LR4 2014 16 | eBay
Bit pricey though!
David
Everything is easy when someone else is doing it
MY14 SDV6 SE Corris Grey
Compomotive 18s : D697s : Traxide DBS : LLAMS : ARB compressor : IC-455
Rhino Platform : GOE compressor, Tx & front bash plates, deluxe sliders
 Master
					
					
						Subscriber
					
					
						Master
					
					
						SubscriberI did that as mine had stone damage so it was silver with big black marks on it, so used some plastidip 1469179842262.jpg
- Justin
Selling soon - MY10 D4 3.0 TDV6 SE with E-Diff & LLAMS, 265/65R18 Maxxis Razr A/T
Moved into MY12 L322 4.4 TDV8 Autobiography
VK2HFJ
Thanks all,
Certainly looks like Plastidip is the way to go.
I am thinking of getting an aerosol can for the grille and left side air vent. Anybody used one and also number of coats needed and drying time?
Thanks
Mike
 Master
					
					
						Subscriber
					
					
						Master
					
					
						Subscriber1 can is plenty, I did mine in 1 go as plastidip self levels to a degree - it doesn't orange peel like paint, just watch out for runs.
The thicker the plastidip the easier it is to remove in 1 go when you decide to remove it.
I did my spare motorbike tank with 2 coats and found I got a better result doing the grille with 1 coat as the solvent will dissolve the first coat easily.
Drying time, I left it a couple hours before refitting, it was still soft though - can says 4 hours.
I also used clear plastidip on the leading face of the rear wheel arch flares to stop paint damage from stones etc.
- Justin
Selling soon - MY10 D4 3.0 TDV6 SE with E-Diff & LLAMS, 265/65R18 Maxxis Razr A/T
Moved into MY12 L322 4.4 TDV8 Autobiography
VK2HFJ
2014 SDV6 HSE - LLAMS, Tuff Ant Tree Sliders, Tuff Ant 18" rims, Nitto Ridge Grappler tyres 265/65 R18, Custom Lipo4 battery, Custom Drawer storage system https://www.box.com/s/jem0ilac3cner2mexq64
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks