Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: Check the suspension compressor cover

  1. #21
    Join Date
    Jan 2018
    Location
    Lilydale, Victoria
    Posts
    227
    Total Downloaded
    0
    I agree with Scott, the APT sliders and compressor cover are very easy to fit. I did mine yesterday - they took about an hour and a half to do both, following Ben from APT’s YouTube video exactly. They fit beautifully.
    Cheers
    DavidAF1406D6-E5D2-41AE-A0BE-BC576D2070F8.jpg

  2. #22
    Join Date
    Sep 2014
    Location
    Baldivis WA
    Posts
    2,293
    Total Downloaded
    0
    Quote Originally Posted by Odysseyman View Post
    They fit beautifully.
    Thanks for that - I note that you havent got mudflaps front and rear - are you still going to fit them?

    I've replaced my factory mud flaps with similar mouldings off e-bay - the new ones fit much better than the OEMs, and are more rubber-like / flexible.

    One mud flap was torn up the middle, so I was going to replace just one, but when looking closer, I found that on all 4 originals, the mounting brackets were completely rusted through, and the area behind packed up with mud and leaves. Then I ended up replacing all 4 of them.

    I really like the look of the APT's but I want to retain the front and rear mudflaps, just double checking that this is definitely possible before committing.

    Cheers.

  3. #23
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Quote Originally Posted by Eric SDV6SE View Post
    ..... I want to retain the front and rear mudflaps, just double checking that this is definitely possible before committing.
    Way off topic now (compressor cover cleaning) Eric but yes 100% the factory mudflaps will fit.
    Consider that rear mudflaps are no where near sliders anyway and the APT slider doesn't come all the way forward to where the front mudflap mounts.
    And while I'm off topic have a look at this thread and do yourself a favour with better mudflaps: D4 Mudflaps

    Cheers,
    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  4. #24
    Join Date
    Jan 2018
    Location
    Lilydale, Victoria
    Posts
    227
    Total Downloaded
    0
    Quote Originally Posted by Eric SDV6SE View Post
    Thanks for that - I note that you havent got mudflaps front and rear - are you still going to fit them?

    I've replaced my factory mud flaps with similar mouldings off e-bay - the new ones fit much better than the OEMs, and are more rubber-like / flexible.

    One mud flap was torn up the middle, so I was going to replace just one, but when looking closer, I found that on all 4 originals, the mounting brackets were completely rusted through, and the area behind packed up with mud and leaves. Then I ended up replacing all 4 of them.

    I really like the look of the APT's but I want to retain the front and rear mudflaps, just double checking that this is definitely possible before committing.

    Cheers.
    Hi Eric
    the sliders don’t go anywhere near the mudflaps, front or rear, so you won’t have any worries there. I’ve just ordered some mudflaps off eBay (they look like a knock-off of genuine ones) a full set for $39. I’m happy to give them a try at that price and if they don’t do the job I’ll invest a bit more time and effort as per the mudflaps thread.

    David

  5. #25
    Join Date
    Jan 2014
    Location
    Perth Western Australia
    Posts
    2,638
    Total Downloaded
    0
    As the OP has suggested its worth cleaning the whole compressor area, be that removing the standard plastic cover or other after market protection.

    *The compressor assembly does get a lot of mud / dirt build up if you are gravel or offroading.
    *The build up of mud will shorten the life of the unit and often makes it noisy when the mud hardens.
    *And every now and then, maybe that 100K have the compressor removed / stripped and cleaned if you are offroading.
    Regards
    Daz


Page 3 of 3 FirstFirst 123

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!