Well, i fitted the new pads on the weekend. I ended up not getting the discs machines, mainly because they were down to 28.2mm front and 18.2mm rear (min is 27mm front and 17mm rear) and i didnt want to lose too much getting them machined. I also saved $110 which is nice! Brake Discs, to machine or not to machine?

So far no squealing and brakes are feeling fine.

Heres a pic of old vs new pads


I think i got my moneys worth out of those old pads...

One last question - my pad wear sensors are busted. To stop the warning do i cut the wires and join them?

Thanks for all your help everyone!

Cheers

Dan