G'day peoples,
I have just been playing around with the d3 and had to remove some wiring (uhf and winch) to get the grille off and now the brake lights are on all the time, even when the car is off. I have cleared all codes with my nanocom and even done a vehicle reset but all to no avail. The car is still driving fine with no faults coming up, does anyone have any ideas?
Cheers
Glen
Fossicker
Do you have a brake controller fitted? If so then It's worth unplugging and resetting. I had a combination of faults a few weeks ago with the brake lights staying on. Fitted a new brake switch and still had the problem until the brake controller was unplugged, reset and plugged back in and all back to normal.
Cheers for that, I do have a brake controller fitted so I will give that a go after I get home tonight.
RoverLord
If the brake switch is faulty you can get the identical version from Ford,considerably cheaper.
Andrew
DISCOVERY IS TO BE DISOWNED
Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
Snow White MY14 TDV6 D4
Alotta Fagina MY14 CAT 12M Motor Grader
2003 Stacer 525 Sea Master Sport
I made the 1 millionth AULRO post
Disconnected the electric brakes and the lights came off so all good now. Thanks again for the advice. Thanks again also to Andrew
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks