Results 1 to 5 of 5

Thread: Looking for drivers door glass retaining clips (for a Disco3)

  1. 5th December 2016, 06:00 PM #1
    squiddy Guest

    Looking for drivers door glass retaining clips (for a Disco3)

    Hi guys,

    The drivers side window on my '08 disco3 has issues going up and down. The cause, as it turns out, is a broken plastic tab that connects the glass to the regulator. Photo of broken tab along with regulator, and an article that shows how the part bolts onto the window.

    I've been searching the 'net for this part, and can't find it. The local LR parts guys tell me they come with the window At $245 for the window I was hoping to find another solution.

    Any ideas or suggestions ?

    Cheers,
    Ben
    Attached Images Attached Images
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  2. 5th December 2016, 07:46 PM #2
    Tombie Guest
    I don't have my 3D printer yet but someone here may be able to knock one up for you...
    Reply With Quote Reply With Quote
  3. 5th December 2016, 08:05 PM #3
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    TRS in SA wreck heaps of D3/D4s,Sureley they would have them sitting in the shattered glass inside doors.
    You could try Westcoast Rover in Kenwick.Its hit and miss what sort of reception you get.They wreck a few Landies,unsure if he does new stuff.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  4. 5th December 2016, 09:48 PM #4
    squiddy Guest
    Thanks - I'll try TRS in SA. No luck with Westcoast Rovers. These tabs are just bolted on, so easily salvageable.

    The 3D printer idea intrigues me. Not having a part number makes this tab bit hard to search for, so I'd have to design my own
    Reply With Quote Reply With Quote
  5. 5th December 2016, 09:56 PM #5
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Contact Chris in Bunbury(cjc_td5)
    He is a helpful chap,has a 3d printer and a D4 so may be interested in having a go if you cant find any.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
« anyone running 285/50r20 on a 3.0 D4? | Mitchell Bros Hitch and Rear Parking Sensors »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!