Thread: Air Filter Box Repair

Originally Posted by crawal

drill them out and put in nustsert if you get alloy ones you can set them with out a gun (also called riv nut) Cheap kits on fleabay , if the have been hammered about put washers around the insert then set

Know what you're suggesting but not for a D4 airbox - just won't work in this application.

Why not just fill the holes with this stuff


Q-Bond SMALL Plastic Repair KIT QBOND Bonding Glue
under plastic repair on ebay.

If necessary get a drill and make the hole bigger at the bottom , then fill with the bonding agent, and then redrill the hole to the original size.

Or you could try placing some glad wrap around the screw , placing the filler in the hole and then you should have a thread formed.

Regards Philip A