Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Sliders/Steps (again)

  1. #1
    Join Date
    Jan 1970
    Location
    Mornington Peninsula, Victoria
    Posts
    589
    Total Downloaded
    0

    Sliders/Steps (again)

    Sorry to ask as I know it's been covered before. I am wanting to put a set of sliders on & thought that wider ones (step for the wife & kids) would be the go. I previously had a D2 with ARB steps which I liked as they had the tread plate (?) on top. I have looked into the options (Brads,APT,Gordons) but am still a little unsure the best root. I would prefer no cutting if pos. The tread plate is not a must but am guessing wider ones would be a better option for me (?). Any opinions on what you have & if you are happy with your decision appreciated.

    Cheers.

  2. #2
    Tombie Guest
    Wider ones make it harder to get out...

  3. #3
    Join Date
    Apr 2011
    Location
    Coffs Harbour
    Posts
    504
    Total Downloaded
    0
    I have gone with Brad's (Metfit) sliders in the narrow version due a petite wife who found it a step too far to get into the Disco otherwise. They are exactly right as they do not get in my way when I step out (6'2") but she can use them to get in and out.
    I have driven several work vehicles with wide steps and unless careful end up getting mud on the back of my trousers leg.
    2012 Fuji White 3.0 D4, Rear view camera, Hi-line sound, E-diff, Xenon lights, ARB winch bar, Lightforce 240 50w HID. Brads sliders.

  4. #4
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Wider ones prevent shopping trolley injuries.
    Yes mud on the strides is a issue if you dont stand on the tread plate.
    Gordon now has treadplates available on his as an option.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  5. #5
    Join Date
    Apr 2016
    Location
    New South Wales
    Posts
    693
    Total Downloaded
    0
    Even on the narrow ones my leg hit initially, I've since retrained myself to get out of the car differently.

    In my opinion:

    Narrow ones look far better and work well off road but offer never zero protection from other people's doors in a car park.

    Wider ones look terrible but do the job they were intended for. I'm sure you could get used to using them as a step on the way out to avoid the dirty jeans just as I have with the narrow ones

  6. #6
    Join Date
    Feb 2013
    Location
    Wamuran, Qld
    Posts
    786
    Total Downloaded
    0
    Quote Originally Posted by gofish View Post
    Sorry to ask as I know it's been covered before. I am wanting to put a set of sliders on & thought that wider ones (step for the wife & kids) would be the go. I previously had a D2 with ARB steps which I liked as they had the tread plate (?) on top. I have looked into the options (Brads,APT,Gordons) but am still a little unsure the best root. I would prefer no cutting if pos. The tread plate is not a must but am guessing wider ones would be a better option for me (?). Any opinions on what you have & if you are happy with your decision appreciated.

    Cheers.
    In my case, wife was the best root.
    APT sliders with tread plates was the best route.
    Wife happy with both.
    Ron

    2013 D4 SDV6 SE

  7. #7
    Narangga's Avatar
    Narangga is offline TopicToaster Silver Subscriber
    Join Date
    Jun 2008
    Location
    McMinns Lagoon NT
    Posts
    4,528
    Total Downloaded
    0
    I put Bearmach sliders (with tree bars) on the D2 as I didn't want something sticking out as wide as the ARB steps. In hindsight I should have got the ARB steps due to the available width for people (particulalry older folk) to plant their foot on when getting into and out of a quite high vehicle.

    One of the reasons we bought the D3 is because it has Access Height and I have added LLAMS to enable it to lower an additional 20mm. This means that the front passenger seat of the D3 is actually the same height off the ground as out 2006 Tarago's front passenger seat. The Targo is being used by a friend at the moment and so I can measure the floor level of the respective vehicles but it is similar.

    We no longer live in Arnhem Land and so at this stage we do not have either steps or sliders on the D3 as we have Access Height and LLAMS that cater for need of easier access. The protection that steps/sliders give has not been put to the test yet (unfortunately ).

    Ultimately you will need to determine what works best for you; but knowing how younger (children) and older people are, then the wider the better is the answer to your ingress and egress.
    Cheers, Dale
    PIC - It comes with the Territory

    'The D3' - 2006 TDV6 HSE
    2008 Kimberley Kamper Sports RV
    Previously Enjoyed:
    2002 Adventure Offroad Campers 'Cape York'
    2000 D2 Td5 - plus!
    1997 Defender 110 Wagon - fully carpeted

  8. #8
    Join Date
    Jan 2015
    Location
    Sydney
    Posts
    899
    Total Downloaded
    0
    I recently put GOE (Gordon) deluxe (wide with step infills) on mine. (https://www.aulro.com/afvb/l319-disc...e-sliders.html)


    Sliders/Steps (again)-img_9679.jpg

    Offerings from APT (Ben) and Metfit (Brad) both looked good to me too. I also didn't really want to do any cutting so that ruled out Metfit - although by all reports it is not difficult, and you do have more of the sill protected.

    I like the look of the APT sliders too, especially with the skid plate underneath like Scott's (http://www.aulro.com/afvb/l319-disco...sliders-6.html), but in the end I opted for the lighter weight of the GOE option.

    My kids and 5'1" wife find them a good step to get in and haven't had any complaints about getting out. One thing I do still need to do though is to put a few drainage holes in the infills.

    David
    Attached Images Attached Images
    Everything is easy when someone else is doing it
    MY14 SDV6 SE Corris Grey
    Compomotive 18s : D697s : Traxide DBS : LLAMS : ARB compressor : IC-455
    Rhino Platform : GOE compressor, Tx & front bash plates, deluxe sliders

  9. #9
    Tombie Guest

    Sliders/Steps (again)

    Quote Originally Posted by LandyAndy View Post
    Wider ones prevent shopping trolley injuries.

    Yes mud on the strides is a issue if you dont stand on the tread plate.

    Gordon now has treadplates available on his as an option.

    Andrew


    No they don't, not even close to stopping a trolley hitting the vehicle.

    And they certainly don't stop back doors either!!

    Wider ones (wider than a shoe) make it difficult for entry and egress with the door ajar; common in car parks..
    The shorter the leg the worse it is..

    And a side note - also puts more strain on seat edge.. due to how you need to twist to get over wider sliders.

    The Std width APT with tread plates is more than enough to stand and climb if necessary, wider increases problems and adds leverage if grounded offroad potentially leading to more damage.

    A D3/4 is a different seating position to a D2 so needs different consideration in step design. As the D2 is higher but closer to edge; D3/4 is lower but further inboard.

    Keep in mind: Anyone buying sliders to prevent supermarket damage is kidding themselves Sliders/Steps (again)

  10. #10
    Join Date
    Jan 1970
    Location
    Mornington Peninsula, Victoria
    Posts
    589
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    No they don't, not even close to stopping a trolley hitting the vehicle.

    And they certainly don't stop back doors either!!

    Wider ones (wider than a shoe) make it difficult for entry and egress with the door ajar; common in car parks..
    The shorter the leg the worse it is..

    And a side note - also puts more strain on seat edge.. due to how you need to twist to get over wider sliders.

    The Std width APT with tread plates is more than enough to stand and climb if necessary, wider increases problems and adds leverage if grounded offroad potentially leading to more damage.

    A D3/4 is a different seating position to a D2 so needs different consideration in step design. As the D2 is higher but closer to edge; D3/4 is lower but further inboard.

    Keep in mind: Anyone buying sliders to prevent supermarket damage is kidding themselves Sliders/Steps (again)
    Intersting & valid points. Thanks very much for all the feedback folks. Maybe narrower ones are the go afterall (?). Any group buys for these ever come up ?

Page 1 of 3 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!