Thread: Long range fuel tank

Thanks Tombie, shall do.

this is the first of a number of posts for installing the long ranger tank. First up is the friendly mounting of the control switch and LED readout.

I did not want to make a hole in the dash that was large and obvious. I have come up with a novel way to mount the small control panel.

i used a l myth of 25mm grey electrical conduit and conduit clip, angled the conduit clip backing and spray d the lot mat black.

with the air of a small 5mm hole on the side plastics at the A pillar I mounted the clip and tube via bolt, washer and nylock to the plastic panel. Cable routed through dash, control box will be stuck to rear of foot well plastics with high strength double sided tape.

perfect position to monitor fuel status and you have right hand access and you still look forward.

You haven't run the wiring to the rear yet I hope!

Originally Posted by DiscoJeffster

I love a man who takes pride in their work and performs their own mods. Admittedly at times I've questioned my ability, but at least you know what was done so if there's an issue, you're best placed to respond.
I do all my own work, and see it as either an opportunity to save money and learn, or buy tools in lieu of labour costs.

here here.