Page 1 of 11 123 ... LastLast
Results 1 to 10 of 106

Thread: where's Gordon?

  1. #1
    Join Date
    Feb 2017
    Location
    Perth
    Posts
    331
    Total Downloaded
    0

    where's Gordon?

    Anyone know how to get hold of Gordon? I've been trying for a couple of weeks now.


    Urgently need to get hold of my EAS rods I ordered several weeks ago as I'm going to Wellington dam this weekend and could really use the extra height. Grabbing the EAS compressor bash-plate I ordered too would be useful too!

    I understand he was in Sydney to conduct a training session but no replies to email / voicemail or text?

    Or does anyone have a set of rods they'd be willing to loan me (or rent me) for the weekend? I'm located in Perth

    cheers guys

  2. #2
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    450
    Total Downloaded
    0
    Last i heard he was on the road travelling back from the eastern states to Perth. This was about 2 days ago.

  3. #3
    Join Date
    Sep 2014
    Location
    Bathurst, NSW
    Posts
    231
    Total Downloaded
    0
    I was with Gordon at the Sand course at Forster NSW over the last weekend. He didn't intend to leave Forster until Monday morning. He probably won't be back in Perth till at least late today or tomorrow.

    However, I wouldn't try to contact him. In view of what has been happening it was no doubt a strain on him to still run the course. It's not appropraite for me to publicly discuss what the issues are, however, I'd suggest that Gordon should be not hassled for a couple of weeks at least.

    Trevor
    2014 SDV6 SE, Fuji White, ARB bar, Fyrlyt 5000, Pioneer Platform, Traxide D4-5S, Maxxis 980 Bravo, GOE Compressor Plate, ICom-450 UHF, Red Arc Tow Pro.
    Elite Murray 2 Caravan 24'4" Tare-2917kg, ATM-3500kg

  4. #4
    Join Date
    Jun 2015
    Location
    Perth
    Posts
    57
    Total Downloaded
    0
    Quote Originally Posted by BrianElloy View Post
    Or does anyone have a set of rods they'd be willing to loan me (or rent me) for the weekend? I'm located in Perth

    cheers guys

    Brian - I have some at my office in Belmont (WA). PM me if you want them.

  5. #5
    Join Date
    Apr 2016
    Location
    New South Wales
    Posts
    693
    Total Downloaded
    0
    Trevor, how was the course? Where in Forster was it held?

  6. #6
    Join Date
    Sep 2014
    Location
    Bathurst, NSW
    Posts
    231
    Total Downloaded
    0
    Quote Originally Posted by Lukeis View Post
    Trevor, how was the course? Where in Forster was it held?
    The course was excellent.

    We all learned heaps. It's unbelievable how capable the D4 is on sand. No safety issue or problems with the course at all.

    We were all based at the Tuncurry Big 4. After Sat morning lecture, out onto Tuncurry Beach for the drive along the whole length. 10km or so I'd guess. Continual reinforcement about dsc off. Just practice is dry and wet sand. looking at fuel consumption. Also practicing command shift driving. We had all aired down to 16-17 for this beach.

    Air up. we all practiced emergency stop. Never knew this. Impressive.

    Drove up to Old Bar beach 16-17 again. Some fording through a channel to a sand bar. Advised on the role on rock crawl mode when needed even on sand or water. Demonstated about how to get extended and emergency height with jack method.

    Sunday- down to sandbar beach very soft. I would not have believed a car do drive on this stuff. 16-17 at first but a couple of us nearly got stuck and one couldn't get up dune. Just digging in. We all dropped to 12. Huge difference. Practice in really soft stuff plus opportunity for all to go up some dunes. We also all practiced sand recovery with snatch, but I reckon in reality a D4 may never need snatching.

    No one needed to use Maxtrax at all. Gordon turned off everything and bogged his RR sport to the chassis. Meant to be a maxtrax demo. Dug out 2 wheels a bit with shovel then did the lowering trick to that the car extends up and then he went to emergency height. Thought we may have had to use maxtrax but car can straight out. Everyone impressed.

    Later in afternoon for those who wanted and had sliders a rough trip down McBrides Beach trail. Got some nice video.

    A great confidence building weekend.

    Trevor
    2014 SDV6 SE, Fuji White, ARB bar, Fyrlyt 5000, Pioneer Platform, Traxide D4-5S, Maxxis 980 Bravo, GOE Compressor Plate, ICom-450 UHF, Red Arc Tow Pro.
    Elite Murray 2 Caravan 24'4" Tare-2917kg, ATM-3500kg

  7. #7
    Join Date
    Sep 2014
    Location
    Bathurst, NSW
    Posts
    231
    Total Downloaded
    0
    2014 SDV6 SE, Fuji White, ARB bar, Fyrlyt 5000, Pioneer Platform, Traxide D4-5S, Maxxis 980 Bravo, GOE Compressor Plate, ICom-450 UHF, Red Arc Tow Pro.
    Elite Murray 2 Caravan 24'4" Tare-2917kg, ATM-3500kg

  8. #8
    Join Date
    Aug 2008
    Location
    Perth, WA
    Posts
    2,479
    Total Downloaded
    37.36 MB
    I have a spare set as well if you need them. Am located North of the River.

  9. #9
    Join Date
    Apr 2016
    Location
    New South Wales
    Posts
    693
    Total Downloaded
    0
    Awesome, stoked you guys did mcbrides. Anyone get stuck? Did the take the easy or hard path from mid way down?

  10. #10
    Join Date
    Feb 2012
    Location
    Canberra/Melbourne
    Posts
    1,711
    Total Downloaded
    0
    I would be interested to know what has happened lately as i have ordered (and paid for) 4 18" GOE rims and would like to know when they will be delivered. I have had no success withe emails either. I will ring him this week.
    [SIGPIC]

    2012 LR Defender 90 (BERT) Gone
    2012 Husqvarna WR 300
    2014 FPV F6 Gone
    2005 D3 SE V8
    2011 D4 V8
    2016 Moto Guzzi California Audace.

Page 1 of 11 123 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!