Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 42

Thread: D3 DRL Replace Fog Lights Any Problems

  1. #11
    Tombie Guest
    Quote Originally Posted by orangepop View Post
    Has anyone any tips on how / where to get a wire through the fire wall to the glovebox fuse box
    Pick up from the main fuse box D3 DRL Replace Fog Lights Any Problems

  2. #12
    Join Date
    Oct 2012
    Location
    Gold Coast
    Posts
    136
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    Pick up from the main fuse box D3 DRL Replace Fog Lights Any Problems
    Thanks Tombie but the unit I’m installing needs to piggyback off the Fog Light fuse #3 in glovebox fuse box.

  3. #13
    LRD414's Avatar
    LRD414 is online now Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Quote Originally Posted by orangepop View Post
    Has anyone any tips on how / where to get a wire through the fire wall to the glovebox fuse box
    Quote Originally Posted by loanrangie View Post
    There is a spare grommet in the aux battery box (where abs pump is ) on driver side .
    And it's easy to get behind the centre console from the driver side grommet to the passenger side, from where you can get to the glovebox fuses. There's photos of the grommet in the trailer brake sticky thread. Note that the grommet on the passenger side is pretty much full of cables already and you have to remove the battery and probably the fuse box to get at it on the engine bay side.

    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  4. #14
    Tombie Guest
    Quote Originally Posted by orangepop View Post
    Thanks Tombie but the unit I’m installing needs to piggyback off the Fog Light fuse #3 in glovebox fuse box.
    What kit are you fitting?

  5. #15
    Join Date
    Oct 2012
    Location
    Gold Coast
    Posts
    136
    Total Downloaded
    0
    Quote Originally Posted by LRD414 View Post
    And it's easy to get behind the centre console from the driver side grommet to the passenger side, from where you can get to the glovebox fuses. There's photos of the grommet in the trailer brake sticky thread. Note that the grommet on the passenger side is pretty much full of cables already and you have to remove the battery and probably the fuse box to get at it on the engine bay side.

    Scott
    Thanks Scott. Ive looked at those photos & located the Grommet in engine bay although I can’t identify a way to get a wire from drivers side to passenger side ... a bright torch from either side isn’t visible from the other .... I’m in the dark .

  6. #16
    Join Date
    Oct 2012
    Location
    Gold Coast
    Posts
    136
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    What kit are you fitting?
    From eBay ( dual fog / DRL) IMG_6997.jpg

  7. #17
    LRD414's Avatar
    LRD414 is online now Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Quote Originally Posted by orangepop View Post
    Thanks Scott. Ive looked at those photos & located the Grommet in engine bay although I can’t identify a way to get a wire from drivers side to passenger side ... a bright torch from either side isn’t visible from the other .... I’m in the dark .
    There is a trim panel that sits closest to your feet that the pedals stick through. It has a side piece just above the footrest for your left foot. When you remove this trim you will see a big cavity in behind that side piece and you can simply feed cables across to the other side and fish them across from the corresponding trim piece on passenger side.

    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  8. #18
    Join Date
    Oct 2012
    Location
    Gold Coast
    Posts
    136
    Total Downloaded
    0
    Quote Originally Posted by LRD414 View Post
    There is a trim panel that sits closest to your feet that the pedals stick through. It has a side piece just above the footrest for your left foot. When you remove this trim you will see a big cavity in behind that side piece and you can simply feed cables across to the other side and fish them across from the corresponding trim piece on passenger side.

    Scott
    Great thanks Scott. Was a job getting it off without snapping it but it’s off now.

  9. #19
    Tombie Guest
    Quote Originally Posted by orangepop View Post
    From eBay ( dual fog / DRL) IMG_6997.jpg
    Not necessary to go to the fog fuse for that one!

    You can attach in the main fuse box under the bonnet D3 DRL Replace Fog Lights Any Problems

  10. #20
    Join Date
    Oct 2012
    Location
    Gold Coast
    Posts
    136
    Total Downloaded
    0

    D3 DRL Replace Fog Lights Any Problems

    I figured they specify the Fog Light fuse as it’s a dual fog / DLR light. So what fuse would you suggest it go to in the main fuse box Tombie

Page 2 of 5 FirstFirst 1234 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!