I suspect that it hangs too low for the cross-member if the 8-speed sits as close as the 6-speed.
Hi all, has anyone seen this pan and tried it on their 8hp70?
Heavy-Duty Aluminum Transmission Pan - Ram 1500 (ZF 8HP70) [228053000] - $329.99 : Pacific Performance Engineering, Innovations in Diesel Performance
Regards, Will
Stornoway Grey '09 D3 TDV6 SE, 2015 TERRITORY Engine at 348k
LLAMS, FYRLYTS, OL D4 Bar
Safari Snorkel, D4 hitch, ARB CKMA12
 Swaggie
					
					
						Swaggie
					
					
						I suspect that it hangs too low for the cross-member if the 8-speed sits as close as the 6-speed.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
 Master
					
					
						Master
					
					
                                        
					
					
						I'd agree with Graeme. Be well worth a measure up.
Also,aluminium doesn't take much of a knock to crack.
Steel would be fine,but alloy....
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks