Finally installed a REAL clock in my D3!!

If I remember correctly the very early D3s didn't have the stalk controlled command message centre but I am not sure.

Quote:

---

Originally Posted by Aussie Jeepster

.... what other patches are out there, and how do you know where to find them???? And yes, I do have an iiDBT tool.

---

Depends on model year etc. as to what's available as a patch
Have a look on the Gap website and a search on Disco3 is a good idea too.
I also think that PowerfulUK has even covered a few in its videos etc.

Scott

I used my IID tool to add the clock to the dash on my 05 D3. Without it theres a big empty bit of LCD not being used for anything.

Quote:

---

Originally Posted by shanegtr

I used my IID tool to add the clock to the dash on my 05 D3. Without it theres a big empty bit of LCD not being used for anything.

---

Can you add internal cabin temp? I find it annoying that outside temp is displayed but you cannot get inside temp to display - and the temp selected via the climate control bears no resemblance to the actual temp in the cabin.

Also, what gear you are in displays when you are in Command Shift but is there anyway to display the gear the car is in when in drive and sport drive.

Quote:

---

Originally Posted by garrycol

Can you add internal cabin temp? I find it annoying that outside temp is displayed but you cannot get inside temp to display - and the temp selected via the climate control bears no resemblance to the actual temp in the cabin.

Also, what gear you are in displays when you are in Command Shift but is there anyway to display the gear the car is in when in drive and sport drive.

---

You can Garry, mine has the temp.

I didnt know that was possible.

Quote:

---

Originally Posted by loanrangie

You can Garry, mine has the temp.

---

I've never seen interior temp on any D3 or D4. So can you swap between interior and exterior temps or have them both displayed somehow?

Scott

Quote:

---

Originally Posted by LRD414

I've never seen interior temp on any D3 or D4. So can you swap between interior and exterior temps or have them both displayed somehow?

Scott

---

No it was my mistake, its external temp.
I haven't tried toggling to see if it is possible.

Certainly not possible using the command menu but was hopeful a "tool" could do it as obviously the climate control senses it somehow.

Garry

Quote:

---

Originally Posted by Aussie Jeepster

..... but what I like about a "normal" clock (with sweep hands) is that I can glance at it and see the time, not have to look to see what time it is. If you get what I mean.

---

I know exactly what you mean, there is a lot to be said for analogue displays for monitoring equipment state, or even just seeing the time at a glance.

I was trying to find a 3 gauge binnacle to mount on top of the dash, and a clock was looking like being one of them. But, I haven't seen a suitable binnacle/gauge-pod yet.

still looking.