Thread: Airflow snorkel install

Originally Posted by Maharba

I have the Safari stylr snorkel. Be aware if you need to drill into the pillar you need a special drill bit-1 per hole as it is hardened steel.

Yes! The steel does eat drill bits that’s for sure. I think I managed one drill across the lot but it was blunt and useless by the end of it

Ok thanks .. just finished installing it now .. I do see what u mean.. don’t want to do to many of the installs as a bit of a pain in the bum.. the problem that got me the most was the flexible pipe and fitting that goes onto airbox.. boy I had some trouble .. but all’s well that ends well..
cheers
Dave

Originally Posted by Davetheaviator

Ok thanks .. just finished installing it now .. I do see what u mean.. don’t want to do to many of the installs as a bit of a pain in the bum.. the problem that got me the most was the flexible pipe and fitting that goes onto airbox.. boy I had some trouble .. but all’s well that ends well..
cheers
Dave

Yeah not the easiest accessory i have installed, took me 2 days because i wasnt going to drill any holes until i was 100% sure i had it lined up right, i called airflow who weren't that helpful but another forum member i called was invaluable.

I sent them an email no reply .. if it wasn’t for u I would be still looking at it ..!!! Lol the flex hose needs to be 50mm longer and the a pillar instructions need to be a little more detailed.. but I think I like it .. I will go to super cheap and get some silicone hose I think to replace the one in the kit.. like that silicon turbo hose think off memory it’s blue..
but looks ok I think..
cheers
Dave