Thread: Brake booster vacuum hose

Hi. Yes. Just did it. No special tools required, just little delicate hands. Remove the engine cover and all will be revealed. You can just clean them out in solvent or such as an interim. They have qd with push sides. I didn't change the ball and spring coz I couldn't grasp it and was in the bush! That for later. I'm also about to fit a catch can.

Oil in the brake booster is an indication that the "one way" valve is a problem. I do not know if this comes with the replacement hose

Thanks
The hose on it now, does not have a non return valve, just a hose straight from the booster to the vacuum pump. I will order a new one that seems to have a non return valve and two other hoses coming off it. they may just form a loop but the photo does not show the whole thing. I will get it sent to Leonora PO, and get some solvent while I am there . Would metho do the job cleaning out the booster or would petrol be better
John

Whoa! If I am understanding y'all, you are suggesting your chariot has not had the brake vacuum recall done. Am I right? If so, wheel it into your local lr dealer and insist.

Originally Posted by Ralph1Malph

Whoa! If I am understanding y'all, you are suggesting your chariot has not had the brake vacuum recall done. Am I right? If so, wheel it into your local lr dealer and insist.

As a newish D3 owner, can you point me in the direction of some info re this recall?