Who fitted your brake controller? Look in the D3 sticky thread on discussions re brake wiring. Sounds like yours hasn't been wired up correctly.
 Member
					
					
						Supporter
					
					
						Member
					
					
						SupporterRecently acquired D3 and fitted electric brakes to tow caravan. Noticed fog lights come on when van is connected but indicators etc all seem to work fine. Just towed van from Newcastle to Port Macquarie - suspension warning light came on: pulled over, turned engine off, restarted and light had gone. Came back on about 5 minutes later and seemed to come on at same time that auto headlights came on. Pulled over, had lunch, restarted and no light. Switched headlights from auto and finsished trip with no more warning lights. Can anybody shed any light (no pun intended) on this? PS - I have no LEDS on the van.
Thanks for your help
Who fitted your brake controller? Look in the D3 sticky thread on discussions re brake wiring. Sounds like yours hasn't been wired up correctly.
Oztourer
MY05 TDV6 HSE, Buckingham Blue
Front Runner Slimline II roofrack and rear ladder, Safari Snorkle, Mitch Hitch, Traxide D3-DU, Bushman Fridge, Icom IC-440N UHF, Hema HN7, Tyredog TPMS, GVIF and reversing camera
 Swaggie
					
					
						Swaggie
					
					
						Has the 2nd trailer parker light supply wire that in Oz is used for the electric brake supply, been cut? Lots of references to it in other posts.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks