Replacement D4 interior light bulbs

G'day Disco-tastic - thanks for your posts on this string. Am going to order a pack of 10 of those Yorkim globes you mentioned. Did you manage to find a better option for the rear boot interior light as mine has gone out?

Cheers,
Alex

Quote:

---

Originally Posted by Disco-tastic

Sorry, I wasn't very specific there was I. The flickering ones were 35c each off eBay and were cheap multi SMD globes, that look similar to other Yorkim products. They started flickering within a few weeks. The new ones that I got apparently have a Samsung chip. They haven't missed a beat since October last year.

---

Quote:

---

Originally Posted by Discotheque

G'day Disco-tastic - thanks for your posts on this string. Am going to order a pack of 10 of those Yorkim globes you mentioned. Did you manage to find a better option for the rear boot interior light as mine has gone out?

Cheers,
Alex

---

I have a cheap 6smd chip in the boot light, though i would like to replace it. The yorkims arent bright enough for the boot

Check scotts thread (lrd414) as I think he has a better solution for the rear light, as well as additional lights for the rear hatch.

This is the 9 led one I used: 2x Canbus T10 194 168 W5W 5630 9 SMD DC 12V car wedge side stand light rear O4A8 190268295239 | eBay

See this post for before and after: https://www.aulro.com/afvb/l319-disc...ml#post2542701

David

Quote:

---

Originally Posted by Disco-tastic

I have a cheap 6smd chip in the boot light, though i would like to replace it. The yorkims arent bright enough for the boot

Check scotts thread (lrd414) as I think he has a better solution for the rear light, as well as additional lights for the rear hatch.

---

Quote:

---

Originally Posted by Tombie

Could be. Front doors are MOSFET controlled on the D4.

---

That explains it for me, I've done the full upgrade with the Yorkim globes, could not get the front puddle lights to work on the T10 less, put the standard filaments back in and all good.

I like the clear white light inside, far better than the yellow glow that is standard.

Quote:

---

Originally Posted by l00kin4

This is the 9 led one I used: 2x Canbus T10 194 168 W5W 5630 9 SMD DC 12V car wedge side stand light rear O4A8 190268295239 | eBay

See this post for before and after: https://www.aulro.com/afvb/l319-disc...ml#post2542701

David

---

I have a similar (if not the same) led un my boot light. How do you find the light temperature? I find it too blue, and am trying to find something that matches the colour of the yorkims better.

I don’t mind it too much but I do know what you mean. I’ll have a bit of a poke around to see if I can find a warmer colour temp version.

David

Quote:

---

Originally Posted by Disco-tastic

I have a similar (if not the same) led un my boot light. How do you find the light temperature? I find it too blue, and am trying to find something that matches the colour of the yorkims better.

---