Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 30

Thread: Shortage of Disco Parts

  1. #11
    Join Date
    Jan 2009
    Location
    Kuranda, Far North Queensland
    Posts
    424
    Total Downloaded
    0
    I can't believe how many replies totally miss the point. There are probably many things you can say about what he could/should have done, why he should have kept his disco, why he should not rely on the manufacturer of the vehicle to support it but the original question was intended to determine if supply of parts has been an issue with other owners and if his situation was normal or maybe the result of a slack dealer.

  2. #12
    Join Date
    Jan 2009
    Location
    Kuranda, Far North Queensland
    Posts
    424
    Total Downloaded
    0
    And what other spares when driving a reasonable distance from home? Should it be normal to carry a whole host of spares sufficient to support a trip across the top end every time you drive out of your garage?

    Quote Originally Posted by Zeros View Post
    Should have been carrying a spare radiator hose himself. ...Sounds like he was looking for an excuse to swap the disco for a prado.

  3. #13
    Join Date
    Jan 2017
    Location
    Perth, Western Australia
    Posts
    90
    Total Downloaded
    0

    Availabilty of top hose

    I bought two last week after reading the post about them being cut by the cover. I had to order them and wait until next day.

  4. #14
    Join Date
    Jan 1970
    Location
    Hornsby
    Posts
    232
    Total Downloaded
    0
    I had a radiator hose replaced by my indie they said they had it in stock, during replacement they found that the connection to the radiator was rusted. A day later I had a new hose and radiator. Later on I had a standard service and pretrip inspection, found rear propshaft needed replacing. Ordered and installed same day.

  5. #15
    Join Date
    Jan 2009
    Location
    Kuranda, Far North Queensland
    Posts
    424
    Total Downloaded
    0
    Thanks to those who have shared their experience. It is looking more likely that it was a local issue...

  6. #16
    Join Date
    Jan 2018
    Location
    Lilydale, Victoria
    Posts
    227
    Total Downloaded
    0
    I recently posted a thread about my top radiator hose being sliced by the top engine cover. When my indie enquired about a replacement hose they were told there was not one in Australia nor in the UK. I then contacted a dealer about claiming it on warranty, to which they agreed, and they were able to book me in within two days and completed the repair with a new hose!
    there was no suggestion from them that the hose was unavailable.

    I reckon your friend made his “interesting” decision based on any number of other issues as well and this was merely the straw that broke the camel’s back. (My personal opinion is that he took a giant step backwards...)

    Cheers
    David

  7. #17
    LGM's Avatar
    LGM is offline Master Silver Subscriber
    Join Date
    May 2010
    Location
    Dongara on the Mid West Coast WA
    Posts
    384
    Total Downloaded
    0

    What shrotage????

    In have been an LR owner since 1995 and have owned 4 Disco's two of which are still in the family (D3 & D4) and have had them all serviced at either the LR Dealer / Independent Service Agent / Land Rover Service agent. I have never experienced a parts shortage. That is not to say the every part needed was on the shelf. But the parts were in the country and available within a couple of days maximum. Not bad given that I don't live in a city i.e. I live rural.

    When I read the original post I checked with my LR service agent and they had the in question hose in stock?

    If someone has experienced the situation as outlined then I reckon there is a fair bit of licence being used by the person explaining the lack of parts.
    Understand this though, when I used the word 'licence' it is not the word that I would have preferred to use!

  8. #18
    Join Date
    Jan 1970
    Location
    Adelaide Hills. South Australia
    Posts
    13,349
    Total Downloaded
    0
    Well. licence gets through the online Censor, Bull**** doesn't.

  9. #19
    Join Date
    Jul 2006
    Location
    Brisbane, Inner East.
    Posts
    11,178
    Total Downloaded
    0
    Try buying parts for certain makes that are more than 5-7 years old. "Obsolete, no longer available" is a common response. Many manufacturers run a ruthless obsolescence programme no longer supporting "old" models. Their business is making and selling new vehicles.

    I once worked for a mining and construction equipment company that was taken over by a major diversified corporation. The new owners put the operation under the magnifying glass and made changes.

    Spare parts to be stocked only for the current models on sale and the previous model. Two models old and parts no longer to be ordered when stock ran out. Older models than this not to be supported and declared "obsolete". Only newer used equipment in good condition to be kept in the used yard. Old clunkers to be cut up and sent to scrap dealers. Old machines were not to be wrecked for parts as this only kept another old clunker going. We were reminded that the company's goal was sales of new machines. Spare parts were told to write off and dump all the old parts. They had been supporting machines up to thirty and more years old which were common in the pastoral industry. Customers were not happy but got over it or went after-market for parts.
    URSUSMAJOR

  10. #20
    Join Date
    Jan 1970
    Location
    Adelaide Hills. South Australia
    Posts
    13,349
    Total Downloaded
    0
    Ain't that the truth Bigbjorn.

    I took my '95 facelift Discovery into a well known East of the city service joint. Can't recall the problem I had at the time, alternator I think it was, & was told by the principal that "they didn't work on cars this old."

    Maybe they didn't have the expertise.

    I found that remark a bit stupid as there was a Series "something" in there for repairs.

    These stupid people should count them selves lucky that all models of LR go in for repairs somewhere & the high & mighty attitude did them no favours at all.. A job is a job, right & the arse will fall out of this side of things one day.

    We are not all Brain Surgeons & Lawyers etc, etc. but the attitude was such that I believed that was what they were all concerned about.

    ie. Drop your LR in for the day & give then an open cheque to fit what ever they could get away with + labour at 10 million $ per hour & no questions asked at time of pickup. Spares prices were a bit out of this world as well.

    Not the most in-expensive place to go & their attitude was really ****.

    As it happened, the car needed to go back in there as the alternator crapped itself & had to be replaced under warranty.



    Here endeth the first lesson.

Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!