Thread: Comparison of L319 Wheel Types, Sizing and Fitments - seeking info.

Gday rewillia,

I don't know of a comparison table so to speak , but from what I have read about the D4 , the big issue seems to be the front brake calliper size , type , which limits the rim type.

You have used the search function so I would assume you already know the above info anyway.

Good luck with your search.

cheers Ean

There are also Tuffant 18” steel rims available 18" Steel Wheels now available for Discovery 3, 4

Not sure if this tyre information is what you are after, it’s a bit out of date https://docs.wixstatic.com/ugd/a34e4...19_20_inch.xls
and just for 18” tyres
https://docs.wixstatic.com/ugd/a34e4...s_18_inch.xlsx

Another LROCWA member has fitted his D4 with the Tuffants and has BFGs on them. They look good plus are well under the price for the GOE stuff....which doesn't seem to being supplied now anyway.
I'll stick with my OME 19s for now as I have new Maxxis 980s fitted and will wear them out before changing to another rim size.
AlanH.

Originally Posted by rewillia

I am aware of LR's oem 18" wheels as well as Compomotive's Rally and Rhino's but otherwise not aware of other brands I might want to consider.

Tuffant is another good option in 18" and available in USA soon as I understand it.
Plus there is fitment data on the Tuffant website > TuffAnt | FITMENT

Regards,
Scott

The Land Rover OEM 18" rims will NOT fit on your 2016 LR4. They only fit the earlier D4's with the 2.7 litre diesel engine - once the 3.0 litre came out, the smallest OEM rims that would fit were 19".

The GOE rims referred to above can be purchased directly from the UK - the brand name is "Compomotive". GOE is the name of an Australian importer only.

The Compomotive alloys and the TuffAnt steel rims are the only 18" rims that I am aware of that will fit on the later D4's (without doing anything dodgy with an angle grinder).

There’s also a brake rotor and caliper offset bracket upgrade kit available from Britpart for the D4 that takes you to 360mm rotor diameter, meaning that 19” rims are getting tight, maybe hang onto the 20” rims then?

The Compomotives look great, I understand they fit the D4 because the inside rim “dishing” is deeper to allow the standard D4 brake rotors and calipers to fit, and the 18 rim size gives more tyre options.

I did hear from an indie that from what he'd seen the Compomotives may be subject to small cracks when used in the rough stuff. I may go for the TuffAnts sometime in the future as being steel they won't suffer from that at least.
AlanH.

I have a factory 20 inch wheel. 255/50/R20 on my 2015 D4. I do mostly highway and city driving with may be 10 to 15 % off road driving. Can I get a suggestion in what Kind of tyre should I look at? If AT, any suggestions on the brand or mode.

I searched in the forum but couldn’t find any suggestion for 20 inch wheel. I know that 18 or 19 inch is better but preferably would like to keep the expenses low considering that my off road driving are less.

Thanks