Reply With QuoteI have no spec's as my mechanic sent my D3 front diff out for a re-face during it's rebuild , so re-facing might be worth doing while you have it out, especially if it was whining like mine was.
Cheers,
Randy
Fossicker
SubscriberHi All,
Does anyone have the specifications for rebuilding a rear diff (standard not E-Diff). I have purchased bearings and seals, but can't seem to find crush washer/spacer or pre load and backlash specifications anywhere.
Any info appreciated
Cheers
ForumSage
SupporterI have no spec's as my mechanic sent my D3 front diff out for a re-face during it's rebuild , so re-facing might be worth doing while you have it out, especially if it was whining like mine was.
Cheers,
Randy
Last edited by RANDLOVER; 24th February 2019 at 09:52 AM. Reason: Carification.
LordRover
SupporterHave you checked the workshop manual to see if those specs are in there?
Attached is the RRS handbook and workshop manual - the area you are interested in will be the same for the RRS and D3. Unfortunately it is too large to load direct but you can download it from here https://drive.google.com/file/d/1e_2...w?usp=drivesdk - be aware it is 5500 pages.
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks