Rear is the same, my cb came from a d4.
Anchor points aren't factory fitted, I have a hayman Reese and they come with rivnuts and a fitting tool.
Yep, searched and no result.
I have a LR OEM cargo barrier from my sold D3 which I want to put into my D4. Posts on here say it will fit.
it was secured at the top by two bars that screwed into the roof above the rear hatch.
i have removed the trim in the D4 but cannot see anchor points for the screws that were in the D3.
Anyone know is needed to do to fit the D3 barrier into the D4 above the rear cross member?
I’m handy DIY just need the guidance as to what is needed.
thanks in advance.
Rear is the same, my cb came from a d4.
Anchor points aren't factory fitted, I have a hayman Reese and they come with rivnuts and a fitting tool.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
Attached are the instructions for my LR OEM cargo barrier...... "dog guard". In case it may be of help fitted to 2014 discovery.
2014 D4 HSE, Traxide Dual Battery System, llams, Compomotive Rims, Prospeed Roof Rack, Rock Sliders and Compressor Guard.
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks