Thread: EGR Problem

2006 euro 3 TD6 2.7 , These can have the EGR,s blanked with out any ECU programing , there is some debate in wether or not the Butterfly in the air intake where the EGR pipes fit into should be removed or not Google will be your friend here . I can recomend Dovers Automotive at Wangarra for any work you may need on your landy .

You can also get EGR Emulators at Autocode in Welspool which will might be easier than Blanking but more expensive and the EGR,s will need to be in the closed position before fitting Emulators . I would just blank them .

See also;

DISCO3.CO.UK - View topic - EGR Valve - How To...

Originally Posted by Tonytango

Can anyone please advise, my 2006 diesel LR 3 is going intolimp mode, the computer is stating that” P405 Exhaust gas recirculation sensorA – circuit Low”. I am going to use a blanking kit to rectify, but querywhether I will need to get the on-board computer reprogrammed, I have been toldthat my i-carsoft scanner will not reset this fault.
And can anyone advisewhere I will be able to get this carried out in Perth area, without going tothe main dealers, as I am sure it will cost an arm and leg.

Cheers
Tony

I'd recommend talking first to Darren (DazzaTD5 on here) in Rivervale, and he is close to/talks with United Fuel Injection down the road.
Good Independent who plays fair.

Originally Posted by Fatso

2006 euro 3 TD6 2.7 , These can have the EGR,s blanked with out any ECU programing , there is some debate in wether or not the Butterfly in the air intake where the EGR pipes fit into should be removed or not Google will be your friend here . I can recomend Dovers Automotive at Wangarra for any work you may need on your landy .

You can also get EGR Emulators at Autocode in Welspool which will might be easier than Blanking but more expensive and the EGR,s will need to be in the closed position before fitting Emulators . I would just blank them .

Thanks for the advice , not having to reprogramme should make it moreeconomical. Thanks for the recommendation unfortunately Wangarra is a bit of a trot as I'm down in Rockingham.

Originally Posted by Fatso

2006 euro 3 TD6 2.7 , These can have the EGR,s blanked with out any ECU programing , there is some debate in wether or not the Butterfly in the air intake where the EGR pipes fit into should be removed or not Google will be your friend here . I can recomend Dovers Automotive at Wangarra for any work you may need on your landy .

You can also get EGR Emulators at Autocode in Welspool which will might be easier than Blanking but more expensive and the EGR,s will need to be in the closed position before fitting Emulators . I would just blank them .

Thanks Fatso, I think I will go with the blanking off, just need to find someone more local to Rockingham-- south of the River anyway.

Originally Posted by gavinwibrow

I'd recommend talking first to Darren (DazzaTD5 on here) in Rivervale, and he is close to/talks with United Fuel Injection down the road.
Good Independent who plays fair.

Thanks Gavin, I will see if I can get hold of Darren , he is a bit more local.

Try Sovereign Automotive off South St in Myaree.

Sovereign Automotive

Originally Posted by Eric SDV6SE

Try Sovereign Automotive off South St in Myaree.

Sovereign Automotive

Even nearer thanks. Do they specialise in Landrover ?