Page 1 of 6 123 ... LastLast
Results 1 to 10 of 57

Thread: ARB Batwing Awning

  1. #1
    Join Date
    Feb 2010
    Location
    Brisbane
    Posts
    299
    Total Downloaded
    0

    ARB Batwing Awning

    Looking at fitting an ARB Batwing awning to the next D4 - anyone have good / bad experiences with this or other brands?

    Cheers.

  2. #2
    Join Date
    Apr 2019
    Location
    Brisbane
    Posts
    1,762
    Total Downloaded
    0
    Is there an ARB branded bag wing??

    I assume you’re looking at a 270 awning??

    I’ve had

    - standard type straight off the side (home made)

    - supapeg peg 270, which was one of the earlier one to hit the market. It required piles and pegs and was pretty much a two person job to establish in a timely matter.

    - I now have a alu-cab 270 self supporting (probably most expensive on the market), the best I’ve owned to date, it so easy, so quick and only takes one person less than a minute. This means we open it up very regularly due to the ease. If I had my time over I’d have looked closer at the ostrich. We have only had to use the one pole and rope 2 maybe 3 time over the hundreds of time we’ve used it.

    An example, we were on Fraser, is along with say 10 other cars watching the Taylor fisherman. Every car but one had some sort of awning, mostly Kings. It started to rain everybody hopped in their car ls or tried to huddle next to their car........30 sec our was out and we were sitting in comfort enjoying the fishing show. Two punter come over and were amazed at the ease of setting up.

    The only issue for us is water pooling overnight or when we are away from the car, the Alu-Cab has a leg that pops up to provide a slope on the roof...doesn’t stop the water pooling, I’m about to make up two more legs to stop the pooling.

    I’d recommend shelling out a few more dollars on a self supporting.

  3. #3
    Join Date
    Apr 2019
    Location
    Brisbane
    Posts
    1,762
    Total Downloaded
    0

    ARB Batwing Awning

    I notice you are in Brisbane, you’re more than welcome to check out mine. I’m at bracken Ridge but currently way on the south side ‘Warner’ watching cricket.

    I dropped in with a mate to check out the 30sec awning at brendale, for the dollars I’m not sure it’s the best value for money based on looking at the material.

  4. #4
    DiscoMick Guest
    Just make sure you peg and rope it down in wind. I saw one blown right over the roof of a Prado and broken.

  5. #5
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,886
    Total Downloaded
    0
    Quote Originally Posted by DiscoMick View Post
    Just make sure you peg and rope it down in wind. I saw one blown right over the roof of a Prado and broken.
    Good point.

    Yes,been there,done that..

    Happen Punsand Bay,Cape York,a great camping spot.We did some temporary repairs and were able to use it for the rest of the trip.

    We have had the Foxwing for many years,has been great,but we did learn the hard way with the wind.Luckily all the parts were available for it and it was relatively easy to repair.In remote areas,we often sleep under it.

    There are now many other brands on the market,good luck with your choice.

  6. #6
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    If you're in Brisbane, go check out the SupaPeg batwing awning at 14 Binary St Yatala, I swear by my SupaPeg Rapid wing awning.
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

  7. #7
    Join Date
    Jul 2016
    Location
    Blackstone
    Posts
    469
    Total Downloaded
    0
    I have a 270 degree Howling Moon awning. Quick to set up. Self supporting but I usually put the legs down and a couple of sand screw pegs in case of a wind gust. Two person job when windy but solid once set up. Good quality.
    MY08 TDV6 D3 Zermatt Silver, B.A.S ECU Remap, ARB Bar, 12K Kingone Winch, 2x100Ah LiFePo4 Auxiliary Power, Safari Snorkel, Baja Rack Roof Rack, Brown Davis Aux. Tank, RWC, Front Runner Rear Ladder, Drifta Drawers, Doran TPMS, LLAMS, GAP IID BT.

  8. #8
    Join Date
    Sep 2014
    Location
    Bathurst, NSW
    Posts
    231
    Total Downloaded
    0
    Have just gone through process in deciding which 270 degree awning. Read every review and watched countless videos. Decided on the Drifta 270 (without valance).

    Why? Only 15-16 kg. Packs up small on rack. Integrated legs in awning arms. Good quality material. Australian made.

    YouTube
    2014 SDV6 SE, Fuji White, ARB bar, Fyrlyt 5000, Pioneer Platform, Traxide D4-5S, Maxxis 980 Bravo, GOE Compressor Plate, ICom-450 UHF, Red Arc Tow Pro.
    Elite Murray 2 Caravan 24'4" Tare-2917kg, ATM-3500kg

  9. #9
    Join Date
    Apr 2019
    Location
    Brisbane
    Posts
    1,762
    Total Downloaded
    0
    Quote Originally Posted by Briar View Post
    Have just gone through process in deciding which 270 degree awning. Read every review and watched countless videos. Decided on the Drifta 270 (without valance).

    Why? Only 15-16 kg. Packs up small on rack. Integrated legs in awning arms. Good quality material. Australian made.

    YouTube
    Drifta do make nice gear...and I tend to lean towards Aussie made when I can.

    I think Drifta started off using supa peg awnings...could be wrong.

    I’m an surprised they don’t offer a self supporting awning.....they’re just three years too late for us.

  10. #10
    Join Date
    Sep 2014
    Location
    Bathurst, NSW
    Posts
    231
    Total Downloaded
    0
    Quote Originally Posted by W&KO View Post
    Drifta do make nice gear...and I tend to lean towards Aussie made when I can.

    I think Drifta started off using supa peg awnings...could be wrong.

    I’m an surprised they don’t offer a self supporting awning.....they’re just three years too late for us.
    They discussed about self-supporting awnings in one of their videos. Their comment was that all the self-supporting ones have to use huge hinging on the rear corner and that is a lot of pivoting force on the roof rack at a single point.

    The Drifta awning uses a horizontal knuckle arrangement that is quite compact. In addition, Drifta make up special brackets for their awning for the Rhino Pioneer Platform that extends across two of the platform rails to spread the weight of the awning.

    Getting the awning next month along with Drifta drawers and integrated water tank. I really like how Drifta integrate a water tank into their drawer system.
    2014 SDV6 SE, Fuji White, ARB bar, Fyrlyt 5000, Pioneer Platform, Traxide D4-5S, Maxxis 980 Bravo, GOE Compressor Plate, ICom-450 UHF, Red Arc Tow Pro.
    Elite Murray 2 Caravan 24'4" Tare-2917kg, ATM-3500kg

Page 1 of 6 123 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!