Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Discovery 3 Windscreen Surround / Trim clips

  1. #1
    Join Date
    Apr 2020
    Location
    Perth
    Posts
    26

    Discovery 3 Windscreen Surround / Trim clips

    Hi guys, the piece of exterior trim running across the passenger side of the windscreen from the bonnet up to the roof has lost some of the white clips.
    When driving on the highway and with large trucks, the buffeting seems to get under the trim causing it to pop up.
    Some of the white clips are brittle and broken with a few missing.
    Does anyone know a part number or where to source them?
    Cheers

  2. #2
    Join Date
    Nov 2015
    Location
    Melbourne
    Posts
    562
    The Trim Clip Guide attached was posted on this site a few years ago. I can't give it proper accreditation but "they know who they are"!
    Attached Files Attached Files
    2013 D4 expedition equipped
    1966 Army engineering trailer
    (previously SII 2.25 swb, SIII 2.25 swb & lwb, P38 Vogue, 1993 LSE 3.9V8 then HS2.8)

  3. #3
    Join Date
    Jan 2015
    Location
    Sydney
    Posts
    786
    I bought a set of these clips just recently- LR077843 supersedes the previous part numbers. Bag of 5 clips. $13-15 from dealer
    Everything is easy when someone else is doing it
    MY14 SDV6 SE Corris Grey
    Compomotive 18s : D697s : Traxide DBS : LLAMS : ARB compressor : IC-450N
    Rhino Platform : GOE compressor, Tx & front bash plates, deluxe sliders

  4. #4
    Join Date
    Apr 2018
    Location
    Mandurah, Western Australia, 6210
    Posts
    19
    Had same problem

    Try these:

    LAND ROVER WINDSCREEN A PILLAR TRIM CLIPS PLASTIC DISCOVERY 4 RANGE ROVER SPORT | eBay

    Worked a treat for me so far...

    Jeff
    Jkwark
    2011 Discovery 4 3.0L SDV6 HSE

  5. #5
    Join Date
    Mar 2015
    Location
    Horsham Victoria
    Posts
    462
    Index Page Title | Car Parts Clips and Fasteners
    I get any clips through these guys
    Rob

  6. #6
    Join Date
    Apr 2020
    Location
    Perth
    Posts
    26
    Quote Originally Posted by RobMichelle View Post
    Index Page Title | Car Parts Clips and Fasteners
    I get any clips through these guys
    Rob
    Thanks!

  7. #7
    Join Date
    Apr 2020
    Location
    Perth
    Posts
    26
    Quote Originally Posted by Jkwark View Post
    Had same problem

    Try these:

    LAND ROVER WINDSCREEN A PILLAR TRIM CLIPS PLASTIC DISCOVERY 4 RANGE ROVER SPORT | eBay

    Worked a treat for me so far...

    Jeff
    Thanks

  8. #8
    Join Date
    Apr 2020
    Location
    Perth
    Posts
    26
    Quote Originally Posted by DieselLSE View Post
    The Trim Clip Guide attached was posted on this site a few years ago. I can't give it proper accreditation but "they know who they are"!
    Thanks!

  9. #9
    Join Date
    Jun 2013
    Location
    Augusta WA
    Posts
    607
    Quote Originally Posted by TDV6Robvdw View Post
    Hi guys, the piece of exterior trim running across the passenger side of the windscreen from the bonnet up to the roof has lost some of the white clips.
    When driving on the highway and with large trucks, the buffeting seems to get under the trim causing it to pop up.
    Some of the white clips are brittle and broken with a few missing.
    Does anyone know a part number or where to source them?
    Cheers
    When you get the clips, before you refit the 'A' pillar trim check that the clip locations on the 'A' pillar are flush as they can bow out from removal of the trim. Just tap them flat using a small piece of wood and hammer, this will ensure a good seal against the windscreen and no wind noise. Nick
    MY09 D3 TDV6 Zermatt Silver
    MY02 TD5 Bonatti Grey
    MY00 TD5 520K Sold

  10. #10
    Join Date
    Apr 2020
    Location
    Perth
    Posts
    26
    Quote Originally Posted by Pippin View Post
    When you get the clips, before you refit the 'A' pillar trim check that the clip locations on the 'A' pillar are flush as they can bow out from removal of the trim. Just tap them flat using a small piece of wood and hammer, this will ensure a good seal against the windscreen and no wind noise. Nick
    Thanks Nick.
    Sound advice.

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!