Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Broken Wheel Nut

  1. 4th January 2021, 08:51 AM #1
    Ralph1Malph's Avatar
    Ralph1Malph
    Ralph1Malph is offline OldBushie
    Join Date
    Jan 1970
    Location
    Brissy! No flannos here!
    Posts
    8,814
    Total Downloaded
    0

    Broken Wheel Nut

    Hello and Happy New Year!
    Was changing a puncture the other day and dang it, a wheel nut snapped. It's been cracked for a while I suspect as you can see.
    This nut had always been a bit 'bent'. Now I know why. The progress of corrosion inside the crack has swelled and progressively forced that side of the nut open.

    Anyhow, does anyone in North West Brisbane have one (or a couple) they could part with? I'm happy to travel but most wreckers and my usual suppliers are a 45 min drive away....which is a lot for a nut lol.

    I do change my wheels a few times a year to fit my BMW muddies, and I notice that solid nuts can be purchased online.
    Has anyone had any experience with these? As we all know, the stainless caps on the OEM nuts are an 'annoyance' when used often and deform.

    Cheers
    RJ
    133882511_3731647496856426_970664313648841785_n.jpg134683195_734227604156589_8862019759082743594_n.jpg134436455_2791380101178329_1704729601416941292_n.jpg
    Reply With Quote Reply With Quote
  2. 4th January 2021, 10:54 AM #2
    gavinwibrow's Avatar
    gavinwibrow
    gavinwibrow is offline YarnMaster Silver Subscriber
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,838
    Total Downloaded
    0
    Quote Originally Posted by Ralph1Malph View Post
    Hello and Happy New Year!
    Was changing a puncture the other day and dang it, a wheel nut snapped. It's been cracked for a while I suspect as you can see.
    This nut had always been a bit 'bent'. Now I know why. The progress of corrosion inside the crack has swelled and progressively forced that side of the nut open.

    Anyhow, does anyone in North West Brisbane have one (or a couple) they could part with? I'm happy to travel but most wreckers and my usual suppliers are a 45 min drive away....which is a lot for a nut lol.

    I do change my wheels a few times a year to fit my BMW muddies, and I notice that solid nuts can be purchased online.
    Has anyone had any experience with these? As we all know, the stainless caps on the OEM nuts are an 'annoyance' when used often and deform.

    Cheers
    RJ
    133882511_3731647496856426_970664313648841785_n.jpg134683195_734227604156589_8862019759082743594_n.jpg134436455_2791380101178329_1704729601416941292_n.jpg

    Scored a set of solids from my indie DazzaTD5 - now one very happy vegemite with no prospect of stuffed wheel nut covers - and they look better too!
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
    Reply With Quote Reply With Quote
  3. 4th January 2021, 08:00 PM #3
    Eric SDV6SE's Avatar
    Eric SDV6SE
    Eric SDV6SE is offline ChatterBox Subscriber
    Join Date
    Sep 2014
    Location
    Baldivis WA
    Posts
    2,293
    Total Downloaded
    0
    Quote Originally Posted by gavinwibrow View Post
    Scored a set of solids from my indie DazzaTD5 - now one very happy vegemite with no prospect of stuffed wheel nut covers - and they look better too!
    Pics please Gav - are they stainless, coated or plated or just plain black steel?
    Reply With Quote Reply With Quote
  4. 4th January 2021, 08:28 PM #4
    gavinwibrow's Avatar
    gavinwibrow
    gavinwibrow is offline YarnMaster Silver Subscriber
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,838
    Total Downloaded
    0
    Quote Originally Posted by Eric SDV6SE View Post
    Pics please Gav - are they stainless, coated or plated or just plain black steel?

    Here you go Eric. Solid, but not chromed, so assume polished. Dazza had had them for some time.
    Attached Images Attached Images
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
    Reply With Quote Reply With Quote
  5. 5th January 2021, 12:14 AM #5
    BradC
    BradC is offline Super Moderator
    No one of consequence     Supporter
    Join Date
    Mar 2018
    Location
    Perth (near Malaga)
    Posts
    3,546
    Total Downloaded
    0
    Quote Originally Posted by Eric SDV6SE View Post
    Pics please Gav - are they stainless, coated or plated or just plain black steel?
    Does anyone use Stainless wheel nuts? I'd have thought they'd gall something terrible.
    Reply With Quote Reply With Quote
  6. 5th January 2021, 06:39 AM #6
    rick130's Avatar
    rick130
    rick130 is offline Moderator Gold Subscriber
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by BradC View Post
    Does anyone use Stainless wheel nuts? I'd have thought they'd gall something terrible.
    You'd need buckets of anti seize, and chromed wouldn't be good either, it leads to hydrogen embrittlement

    Bright nickel plated would be ok.
    Reply With Quote Reply With Quote
  7. 5th January 2021, 08:33 AM #7
    Eric SDV6SE's Avatar
    Eric SDV6SE
    Eric SDV6SE is offline ChatterBox Subscriber
    Join Date
    Sep 2014
    Location
    Baldivis WA
    Posts
    2,293
    Total Downloaded
    0
    Quote Originally Posted by BradC View Post
    Does anyone use Stainless wheel nuts? I'd have thought they'd gall something terrible.
    Probably, but then only if the hub studs are stainless too.
    Reply With Quote Reply With Quote
  8. 5th January 2021, 08:34 AM #8
    Eric SDV6SE's Avatar
    Eric SDV6SE
    Eric SDV6SE is offline ChatterBox Subscriber
    Join Date
    Sep 2014
    Location
    Baldivis WA
    Posts
    2,293
    Total Downloaded
    0
    Quote Originally Posted by gavinwibrow View Post
    Here you go Eric. Solid, but not chromed, so assume polished. Dazza had had them for some time.
    They look good Gav.
    Reply With Quote Reply With Quote
  9. 5th January 2021, 12:52 PM #9
    LRD414's Avatar
    LRD414
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    I bought a set of solid ones about 4-5 years ago to avoid this issue and the more common swelling and breakage of the cover seen on the factory ones. They’re still fine with just a bit of surface rust so assume they’re coated. Gorilla brand from the US was the main trusted source back then.

    Cheers,
    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.
    Reply With Quote Reply With Quote
  10. 5th January 2021, 01:30 PM #10
    101RRS's Avatar
    101RRS
    101RRS is offline LordRover Supporter
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Quote Originally Posted by Ralph1Malph View Post
    I do change my wheels a few times a year to fit my BMW muddies, and I notice that solid nuts can be purchased online.
    I hope you have not been using your LR wheel nuts with the BMW wheels - the LR nuts with the BMW wheels do not have enough threads in contact to be safe.

    I use these nuts - Gorilla® 14mm x 1.5 Chrome Lug Nuts from Brandsport Auto Parts (#68148)

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Ipod connector type | Ticking from Engine Bay »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!