Placing this here - not in Brake controller sticky...hope this ok.

ok, so my brake controller is looking dead - (red arc - basic model is 8 years old)) no light on LED - tested auto re set fuse - nothing going through so replaced and seems like volts ok now (need to re check).

still no RED led light. (can hear a click???) had to tell when when pushing override. but no light active
Anyway cant see any obvious problems on wiring. will pull foot panel to look further.
Found Brake light fault on codes (but brake lights all work)

Attachment 168626

- this also seems to have an impact on the reversing sensors (fault showing on all 4) and not working) but also send the reverse camera in to Trailer tracking mode - so thus thinks there trailer attached = no sensors and target ide appears

reverse.jpg


FYI 2011 HSE (the trailer tracking as per above is part of the surround camera option)

So any ideas _ Brake controller causing this? (fwiw - if I have to replace the controller - I am thinking of removing and using a wireless module ...


got a range of other errors floating around - some concerning... !!!!!!!!!!!