What is this silver box please

Quote:

---

Originally Posted by gavinwibrow

My only other hassle is that a local auto sparky firm fitted for the PO wiring for towing plus an extra rear Anderson plug, but put all the active connections just in front of the starter battery. Will have to undo much of that to fit Tim's dual battery system in that spot (unless I leave the second battery to sit in the back in an ARK case?)

---

I’d rewire it personally. The 1 hour you spend doing that will be offset by the pain in the neck the Ark will be IMHO

Quote:

---

Originally Posted by loanrangie

I'd be happy to pay postage on it.

---

9


Its only a couple or resistors and a 3 way switch for each set - value about $12-$15 at most, but PM me with address and I'll work out postage and see if its worth any "postage only" charge or just a complete freebee. I've been the recipient of many pass it forward outcomes, and happy to keep the wheel turning for the good'uns on this site.

Quote:

---

Originally Posted by gavinwibrow

9


Its only a couple or resistors and a 3 way switch for each set - value about $12-$15 at most, but PM me with address and I'll work out postage and see if its worth any "postage only" charge or just a complete freebee. I've been the recipient of many pass it forward outcomes, and happy to keep the wheel turning for the good'uns on this site.

---

No worries, if anyone local can pickup then they have priority, i forgot it was the parts and not the box - i can go to Jaycar and get the parts.

Quote:

---

Originally Posted by gavinwibrow

Any one know what the silver box with 2 ties around it and a top and bottom cable is please?
It's in the left hand rear panel just above where the jack would normally reside.
There is also a small black switch just to the rear of the CIG plug above, which I was told was an on/off switch for when you have a fridge or similar attached, but?

I'm in the process of setting up to do the resistor mod for LED fitted trailers.

---

The silver box is a LED trailer light adaptor made by Linear Electronic Design (LED)- so yes same abbreviation!
I've got mine + switch in same location. Regards, David

Quote:

---

Originally Posted by Blue C

The silver box is a LED trailer light adaptor made by Linear Electronic Design (LED)- so yes same abbreviation!
I've got mine + switch in same location. Regards, David

---

Are you sure [emoji41]
All my kits use exactly the same housing [emoji12]

And cost me significantly less to produce.

Quote:

---

Originally Posted by Tombie

Are you sure [emoji41]
All my kits use exactly the same housing [emoji12]

And cost me significantly less to produce.

---

My humble apologies Tombie! I wasn't aware of your product being the same - indeed if I'd known back in 2014 I would have saved my $$$$ and bought yours. I stand corrected!
Cheers, David