YarnMaster
A few months ago there was a discussion on gas struts (for the rear door top section).
Someone mentioned a very helpful supplier (might have been in Balcatta?), but do you think I can remember where I stored the reference.
I actually want a custom made HD pair for lifting the bed in our brick after SWAMBO decided on a heavier mattress and I'm now in danger of getting a hernia each time I have to access underbed storage, or set up the HWS switch and tapwork.
Anyone recall the company?
D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
ChatterBox
Subscriber
Super ModeratorI use these guys in Malaga : McNaughtans - Bus, Truck and Trailer Hardware
ChatterBox
SubscriberWhat I found out also (duh!) is as long as the strut is not dead they can recharge a strut back to working pressure. Magic!
I had some small super high pressure struts out of an 80s car sport seats which were basically unobtainium out of USA or dealer at over $150 each. There were 8 of which 7 still worked albeit low pressure and $100 later I was back in business. Handy for any odd ones although LR boot struts are off the shelf replacements.
YarnMaster
Originally Posted by PerthDisco
Legend - many thanks
D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks