Thread: Oil showing on top of engine.

Not seated correctly, replace oring and go again.. Mine takes a bit of love to get seated correctly..

Thanks Josh. Looking at the pics again I can see where it's not in squarely so will be under the bonnet tomorrow and see what I can do. I'll check the O ring for damage and buy another if necessary.
AlanH.

As a tip, the plastic 90 degree thing gets stress fractures where the metal clip mounts. Mine was endlessly leaking and I examined it close up and could see fractures. This was causing it to continually break free and leak. I bought a new plastic piece and o-ring and it’s not moved since. Let me find some photos

These cracks are enough to allow movement enough to leak. The o-ring seals right on the edge so there not much tolerance.

Part number is

LR014212 - intake duct

LR008353 - large o-ring

Noticed the same oil traces whilst doing a recent oil change.
The air duct was not quite inline where the large clip is,as in DJs post.
Noticed the body of the duct was hitting the radiator hose clamp...possibly preventing correct alignment?
It is the clip immediately below the red box in DJ' pic....shaved a bit off the duct box with a hacksaw blade.