 Master
					
					
						Supporter
					
					
						Master
					
					
						SupporterI noticed on E-bay UK about 12months ago an add for a new crankshaft, where they gave the option of having the old type bearings or the later, 2015 onwards, bearings with a tang on the bearing. They offered a service where they would machine a notch in the corresponding bearing caps for the earlier ones.
 Wizard
					
					
						Wizard
					
					
						 Master
					
					
						Subscriber
					
					
						Master
					
					
						SubscriberI am kicking myself 'cos I can't remember where I read it..... it was a very recent article by a motoring magazine (Modern Motor?? I'll check) which had done an in depth research and discussion with Ford re their new V6 diesel based on their old 3.0 litre for Disco, Jaguar etc.
However they discuss the crankshaft and said it had been updated ... and.... that LR has benefited from the update to fit this crank into their latest 3.0 engines.
If this is true, and there's no reason to suggest it's not, then presumably if one purchased a new crank from LR then it will be the updated one. Is this the V2 mentioned earlier?
Food for thought.
Before: Ser 2a LWB, Ser 3 S/W, 1979 RR 2 door, 1981 LR Stage 1 V8 (new), 1985 LR 110 V8 County (new), 2009 RRS TDV8
Now: MY13 D4 TDV6. "E" rear diff. Cambo's magic Engine & Auto Tune. 1968 Austin 1800 Mk1 auto (my 5th)
 Master
					
					
						Subscriber
					
					
						Master
					
					
						SubscriberThat may well be JPSK Motors in the UK, I think I read them offering this service.
They have a fair bit to say about the shaft failures.
Some of the UK engine rebuilders are fitting Sputter Bearings.
Must confess as a (retired) mechanic I'd never heard of them.
Worth a visit to Google to read up about them.
Before: Ser 2a LWB, Ser 3 S/W, 1979 RR 2 door, 1981 LR Stage 1 V8 (new), 1985 LR 110 V8 County (new), 2009 RRS TDV8
Now: MY13 D4 TDV6. "E" rear diff. Cambo's magic Engine & Auto Tune. 1968 Austin 1800 Mk1 auto (my 5th)
2010 TDV6 3.0L Discovery 4 SE remapped to RRS output, Alaska White, GME XRS-330c, IIDTool BT, Dual Battery, Apple CarPlay, OEM Retrofitted: Cornering lights, Door card lights, Power + Heated Seats, Logic 7 audio
 Master
					
					
						Subscriber
					
					
						Master
					
					
						SubscriberBefore: Ser 2a LWB, Ser 3 S/W, 1979 RR 2 door, 1981 LR Stage 1 V8 (new), 1985 LR 110 V8 County (new), 2009 RRS TDV8
Now: MY13 D4 TDV6. "E" rear diff. Cambo's magic Engine & Auto Tune. 1968 Austin 1800 Mk1 auto (my 5th)
 TopicToaster
					
					
						Subscriber
					
					
						TopicToaster
					
					
						Subscriber Master
					
					
						Subscriber
					
					
						Master
					
					
						SubscriberYep, point taken, but I was more thinking/presuming/hoping it has been fitted to the very latest D5's in the past year or so.
......and is now supplied by LR as a replacement item for D4 engines......
(Wishful thinking maybe on my part!)
The D5 has been out for a few years now.
Before: Ser 2a LWB, Ser 3 S/W, 1979 RR 2 door, 1981 LR Stage 1 V8 (new), 1985 LR 110 V8 County (new), 2009 RRS TDV8
Now: MY13 D4 TDV6. "E" rear diff. Cambo's magic Engine & Auto Tune. 1968 Austin 1800 Mk1 auto (my 5th)
 Fossicker
					
					
						Fossicker
					
					
                                        
					
					
						And I assume the only reason there is vagueness about this is because JLR are treading carefully around the legal implications of "admission to fault"
Which is a shame, but does not change much for any of us who have owned a D4 - there just is no replacement (no pun intended)
What we need to do is find a rouge JLR employee who can dish the dirt
 ChatterBox
					
					
						Subscriber
					
					
						ChatterBox
					
					
						Subscriber| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks