Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Timing belt and oil pump changes 2.7 vs 3.0

  1. #11
    Moctavia Guest
    Quote Originally Posted by Moctavia View Post
    I’ve been down this road with my 2.7 TDI, so I can share what I learned. The timing belt change is a must on both the 2.7 and 3.0 engines, but the oil pump issue seems to be more common with the 2.7. When I replaced the timing belt on my 2.7, I went ahead and upgraded the oil pump since I’d heard about potential failures.

    and for the 3.0, the oil pump doesn’t seem to have the same reputation for issues, so it might not be necessary unless there’s specific wear or you’re already tearing things apart. On another note, I replaced a couple of seals with hnbr rubber ones during the process because they’re great for handling the heat and pressure in these engines.

  2. #12
    Join Date
    Dec 2020
    Location
    Diamond Creek, Vic
    Posts
    173
    Total Downloaded
    0
    When I bought my D3 as part of a preservice check the oil pump was replaced as well as the engine belts. All went well except for an early failure of the crankshaft seal. I subsequently bought the seal type recommended on this forum and paid particular attention to it's installation, making a special tool to set the seal position - no problems since.

  3. #13
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0
    Quote Originally Posted by Aussie Jeepster View Post
    I know the engines both need timing belt changes, but is the oil pump update needed on the 3.0 engines or just the 2.7's?
    Oil pump is only a requirement on early 2.7's. The later 2.7's in both the D3 and prior to MY12 D4 TDV6 range are factory fitted with the upgraded oil pump.

  4. #14
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,770
    Total Downloaded
    1.13 MB
    Quote Originally Posted by twr7cx View Post
    Oil pump is only a requirement on early 2.7's. The later 2.7's in both the D3 and prior to MY12 D4 TDV6 range are factory fitted with the upgraded oil pump.
    Only the very late D3 got the upgraded pump so its worth checking the serial number to confirm before dismissing it and having an engine failure.
    My 07 built MY08 had the old pump and crapped itself.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

  5. #15
    Join Date
    Oct 2012
    Location
    Perth
    Posts
    2,700
    Total Downloaded
    0
    Quote Originally Posted by loanrangie View Post
    Only the very late D3 got the upgraded pump so its worth checking the serial number to confirm before dismissing it and having an engine failure.
    My 07 built MY08 had the old pump and crapped itself.
    Likewise my Sep 07 build MY08 had the old pump. I upgraded at the first belt change in 2013 then changed again at second belt change around 2021 to the latest and greatest for oil pressure peace of mind.

  6. #16
    BradC is offline Super Moderator
    No one of consequence
    Supporter
    Join Date
    Mar 2018
    Location
    Perth (near Malaga)
    Posts
    3,545
    Total Downloaded
    0
    Quote Originally Posted by loanrangie View Post
    My 07 built MY08 had the old pump
    Mine also. Upgraded in 2017.
    MY08 D3 - The Antichrist - "Permagrimace". Turn the key and play the "will it get me home again" lottery.

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!