
 Originally Posted by 
DiscoDB
					 
				 
				If you are building and serious about adding a hoist, then if your garage roof uses a standard truss design between the ceiling and roof it could be changed to a cathedral type design with larger (deeper) rafters and a collar tie at half height which gives greater internal space but no change to the external height.
It opens up all the wasted space that standard pre-fabricated roof trusses create.
This could easily give you an extra 300-400mm above the car footprint.
			
		 
	 
 Yeah sadly I’m on a narrow block at there is another storey above the garage. Next time I say
				
			 
			
		 
			
				
			
			
				2010 TDV6 3.0L Discovery 4 HSE
2007 Audi RS4 (B7)
			
			
		 
	
Bookmarks