Results 1 to 8 of 8

Thread: BMW wheels on D3/4 - wheel nut specifications to suit

  1. 7th February 2025, 02:15 PM #1
    twr7cx
    twr7cx is offline YarnMaster Supporter
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0

    Question BMW wheels on D3/4 - wheel nut specifications to suit

    I'm well aware that the Gorilla 68148 wheel nuts < E-T Closed Lug Nut - 13/16" Hex - 14mm x 1.50 Thread Size - Chrome Finish - Bulk (68148) | Gorilla Automotive > have historically been the go-to solution when fitting BMW wheels onto the D3/4 but they're challenging to come by as no Australian Gorilla dealers stock them, limited availability in the USA and scary freight prices.

    What is it about these nuts that makes them suitable? Is it just the 0.30" of extra thread (ET/E-T) that the shank gives that is required to ensuring there is enough thread on the wheel studs?

    gorilla-lugnuts-lugnuts-et-ultrastyleconicalseat_63.jpg
    gorilla-lugnuts-lugnuts-et-ultrastyleconicalseat_63.jpg

    I ask as it looks like there are some potential local options, including:

    ROH Shank Nuts in M14x1.5 35mm long 19mm Hex Black and/or M14x1.5 30mm long 19mm Hex Open Black
    Shank Nuts - ROH Accessories Shop
    – ROH ACCESSORIES STORE
    Unfortunately no dimensions given on their site but I have e-mailed them to enquire about. Might be suitable?

    Lugnut King Extra Thread Wheel Nut 14mm x 1.5 Thread with Taper + Shank x 43mm Height
    Extra Thread Wheel Nut 14mm x 1.5 Thread with Taper + Shank x 43mm Hei
    – Lugnut King
    IMG_0737_7361c438-03c4-4b2f-8e99-796063be1905_1024x1024@2x.jpg
    Dimensions look very similar to the Gorillas but overall longer length and slightly longer shank (0.01").

    Could these be locally available better priced options?
    Reply With Quote Reply With Quote
  2. 7th February 2025, 02:23 PM #2
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    0.3" is 7.6mm. What you're looking for is at least 14mm of thread engagement and 7.6mm is over half the requirement so will make a significant difference to the legality of the nuts.

    Edit: ensure that the shank isn't so long that the nut tightens on the hub rather than on the rim.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  3. 7th February 2025, 08:14 PM #3
    twr7cx
    twr7cx is offline YarnMaster Supporter
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0
    I would hope that the extra 0.254mm of shank length on the Lugnut King nuts, when compared to the known compatible Gorilla nuts, wouldn't be too much to cause the shank to tighten on the hub. Easy enough to check on the wheels themselves though.
    Reply With Quote Reply With Quote
  4. 7th February 2025, 08:56 PM #4
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    and easy enough to grind off excess too.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  5. 10th February 2025, 03:03 PM #5
    Tombie's Avatar
    Tombie
    Tombie is offline OldBushie
    Join Date
    Apr 2012
    Location
    Whyalla, SA
    Posts
    7,545
    Total Downloaded
    0
    Your timings terrible.

    Just last week I threw out a full set of the specific nuts for use on BMW wheels
    Reply With Quote Reply With Quote
  6. 11th February 2025, 07:27 PM #6
    twr7cx
    twr7cx is offline YarnMaster Supporter
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0
    Dang.
    The Gorilla brand nuts are actually hard to source now. Even most of the US website sellers are out of stock.
    Reply With Quote Reply With Quote
  7. 12th February 2025, 09:22 AM #7
    loanrangie's Avatar
    loanrangie
    loanrangie is offline LordRover Subscriber
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,770
    Total Downloaded
    1.13 MB
    I don't know why you would bother, get some factory 17's or 18's if its a 2.7 D3/4.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan
    Reply With Quote Reply With Quote
  8. 13th February 2025, 12:19 PM #8
    twr7cx
    twr7cx is offline YarnMaster Supporter
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0
    I have factory 18" wheels and would prefer 17" wheels instead.
    The BMW X5 17" are a better offset than the factory LR 17" wheels, whilst being sufficiently load rated for this purpose. Also they were easy to find, cheap to purchase, and are here ready for tyres and nuts to fit.
    Reply With Quote Reply With Quote
« Timing belt and oil pump changes 2.7 vs 3.0 | multiple trouble codes - re-starting old thread »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!