Muppo,
PM Simon_arch1 on the Disco3.co.uk forum he can supply.
Simon is Melbourne based and his webstie is called 4x4intelligence.com.au
Chris
 Fossicker
					
					
						Fossicker
					
					
                                        
					
					
						Are they available here? Or anything similar? Are these the G4 underbody protection plates in the accessories brochue?
Muppo,
PM Simon_arch1 on the Disco3.co.uk forum he can supply.
Simon is Melbourne based and his webstie is called 4x4intelligence.com.au
Chris
 TopicToaster
					
					
						TopicToaster
					
					
                                        
					
					
						$700 seem a lot for what it is.
Jeff
1994 300TDi Defender
2010 TDV8 RRS
Hi muppo,
If you are considering fitting a bullbar at some stage, look at the ARB "Deluxe" bar. I've just fitted one and it includes an under bar "stone" guard to replace the useless plastic bit from LR and makes the retrieval "loop" permanently available.
I think that the "stone" guard may be a bit light on, but forms a wonderful pattern for something heavier.
Best Wishes,
I just fitted the TJM bullbar and found that a cable for the air suspension which loops around the front chassis rail is exposed to road damage. It is on the drivers side and has a plug on it for the air suspension control block which sits in behind the bar. I also had a look at the ARB bar fitted to a D3 and while it is not exposed to the same degree there was a gap in the bar on the RH side of the chassis rail where a stick could enter and cut the cable, hence no air suspension. I made up a plate to cover mine. See pic for the cable in question.

| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks