Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: D3 Bull Bar

  1. #11
    Join Date
    Jan 1970
    Location
    Melbourne, Australia
    Posts
    755
    Total Downloaded
    0
    Quote Originally Posted by Brick View Post
    Also, FYI, the fog lights in the bar are ARB lights not the factory lights that are fitted to the standard bumper.
    I think you will find that the fog lights are the factory lights. Well mine are.

    Chris

  2. #12
    Join Date
    Mar 2008
    Location
    Sydney, Australia
    Posts
    2,351
    Total Downloaded
    0
    That's interesting, I had assumed they were LR ones put back in. I got the orig bumper back, fog light cowlings but no lights.
    My fogs are actually foggy, was going to claim from LR before warrany went but I bet ARB have only one years.

  3. #13
    Join Date
    Jan 1970
    Location
    Sydney, NSW (nr Epping)
    Posts
    1,439
    Total Downloaded
    0
    Hi CaverD3,
    I suspect that you are right that the foglights fitted to the ARB BB are the LR lights. In my case, I didn't have LR foglights & when the ARB BB was fitted, I still have no foglights.

    Best Wishes,

  4. #14
    Join Date
    Jan 1970
    Location
    Brisbane
    Posts
    248
    Total Downloaded
    0
    They put the LR lights back in mine when the BB was fitted.
    the only thing I don't like with the ARB BB on mine is the cable ties
    holding the plastic under the guards

  5. #15
    Join Date
    Apr 2008
    Location
    Sydney
    Posts
    124
    Total Downloaded
    0
    Hmmmm...I got a cable tie too...only on LHS. Suspect it is to prevent a self tapper puncturing the washer reservoir.

  6. #16
    Join Date
    Jan 1970
    Location
    Nedlands, WA
    Posts
    2,012
    Total Downloaded
    0
    I've used the front eye for both snatching and winching with no problem.

    My fog lights are the LR ones.

  7. #17
    Join Date
    Apr 2008
    Location
    Sydney
    Posts
    124
    Total Downloaded
    0

    D3 Bull Bar Pics

    ...as requested. Won't stay this clean for long!!!!
    Attached Images Attached Images

  8. #18
    Join Date
    Jan 1970
    Location
    Sydney, NSW (nr Epping)
    Posts
    1,439
    Total Downloaded
    0
    Hi Rovers1952,
    Is that an ARB Northside sticker on your bar? They fitted mine & w/o cable ties (although mine is a non-winch bar).

    Best Wishes,

  9. #19
    Join Date
    Apr 2008
    Location
    Sydney
    Posts
    124
    Total Downloaded
    0
    If that is Artarmon, then yes. But they used a cable tie where the washer reservoir is...and have apparently punctured it with a self tapper precisely where the cable tie hole is. Mine is not a winch bar either.

  10. #20
    Join Date
    Jan 1970
    Location
    Sydney, NSW (nr Epping)
    Posts
    1,439
    Total Downloaded
    0
    Quote Originally Posted by rovers1952 View Post
    If that is Artarmon, then yes. But they used a cable tie where the washer reservoir is...and have apparently punctured it with a self tapper precisely where the cable tie hole is. Mine is not a winch bar either.
    Hi rovers1952,
    Yes, they are at Artarmon & it sounds like they have "stuffed up". If you don't receive satisfaction, advise this forum & I am confident that we will get it right.

    Best of Luck,

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!