Thread: D3 Remote Key Fobs

The "other function" button on my remote reprogammed itself recently. I have it set to turn the headlights on and off, but it decided it was much better to not just unlock but half unlatch the rear upper tail gate. Even better, there is no mention of this option in the manual. Work that one out A definite "undocumented feature". I've reset it to operate the lights.

Originally Posted by AndrewM

The "other function" button on my remote reprogammed itself recently. I have it set to turn the headlights on and off, but it decided it was much better to not just unlock but half unlatch the rear upper tail gate. Even better, there is no mention of this option in the manual. Work that one out A definite "undocumented feature". I've reset it to operate the lights.

Hi there,

I've tried to program the key fob to lift/lower the D3, couldn't get it to work, anyone tried it?, succeeded?. (SE V6 '07)

Cheers

From memory (at home on holidays) all doors closed, hazards ON, push the LandRover button on the key & hold then push the EAS switch up & hold until a chime is heard.
Then to operate the hazard switch must be ON & all doors closed, push & hold the LR button & lock is up? & unlock is down? (not exactly sure!!)
It should be in your manual, BUT u have an 06my, & it may not be in that.
Maybe someone could access GTR & post the how to from the owners manual.
Cheers

Originally Posted by sniegy

From memory (at home on holidays) all doors closed, hazards ON, push the LandRover button on the key & hold then push the EAS switch up & hold until a chime is heard.
Then to operate the hazard switch must be ON & all doors closed, push & hold the LR button & lock is up? & unlock is down? (not exactly sure!!)
It should be in your manual, BUT u have an 06my, & it may not be in that.
Maybe someone could access GTR & post the how to from the owners manual.
Cheers

thanks, it's Jan '07 built and read it in the manual so I thought I'd try it. I guess I have to read the manual again :-). Does the engine need to be running at when programming/operating?

thanks

Originally Posted by simondebbie

Just received our 2006 D3 SE today having purhased late last year at auction. The remote key fobs that came with the vehicle do not work, however the key locking and ignition works fine. Had a quick look at the owners manual and noted that the remote battery is charged via the ignition. So had a half hour drive to see if this fixed the problem however it didn't. As I said, new to the vehicle as of today so thought I'd see if this is something simple that I can't figure out. Sticker on drivers side says "ICE fitted with computer anti theft system". Any help appreciated prior to going to Land Rover. Cheers

I have a 2006 HSE and both my key fobs failed requiring replacement under warranty. It's as though the battery stops charging up and they won't lock or unlock the doors. Best just to get LR to replace them as they cost over $400 each if you have to do it outside of warranty.