Thread: Fitting a Tekonsha P2 to an 09 RRS TDV8

Originally Posted by elsey

Following on from Lotz-A-Landies, if you can exchange your P2 for a P3 without too much trouble IMO that would be good for the reasons stated.

I have a P3 mounted under dash in my D4 and find that it quite accessible. I am also tall and have not found it to cause a problem for my left knee mounted in that position. I am aware that some have preferred to mount theirs on the dash while others have opted for the Redarc remote mount controller.

Lou...

Originally Posted by Lotz-A-Landies

Just a personal opinion but while the Prodigy P2 has a couple of extra functions, you may find that mounting it under the dash makes getting at the adjusting wheel on top a little more difficult and the display hard to see.

In the under dash RRS/D3/D4 situation the P3 seems to have more advantages.

Hi Guys,

I tried the P2 under the dash (just held it there) and could see exactly what you mean re the adjusting wheel access. Called the vendor this morning (in Aus) & he had no problem agreeing to exchange it for a P3.

Thanks - a good call.
Cheers
John ....

The instructions given John are for a 10MY onwards not for your vehicle as the 9 in your VIN designates what model year it is.

So search for "electric trailer brakes wired" & you will see a different set of instructions specific for your applicable model year.

Any questions you know where we live

Cheers