Thread: RRS TDV8 Front Noise - Chirp/squeal/Rattle

My first check would be for a failing/seizing serpentine belt tensioner or idler pulley, with the squealing indicating that immediate action is required.

It happens when I go over bumps or uneven surfaces.

Ah, so not from the engine - probably not so urgent. Could be worn roll bar bushes but have you checked the wheel nuts?

Could be wheel bearings, could be lower control arm bushes.

I've never known a failing bearing to not howl louder and louder as they deteriorate and always sound worse when on the outside when cornering. However the chirping/squealing suggests a rotating part or at least metal on metal.

Originally Posted by Chilly

Hi All,
I have a TDV8. 2008. Couple of days ago it start chirping/rattle/squeal type noise form the front Drivers side. (O/S/F).

Appreciate advise.

Thank you

Chilly

Not something simple like the brake rotor shield catching? That's a pretty awful noise

Originally Posted by Graeme

I've never known a failing bearing to not howl louder and louder as they deteriorate and always sound worse when on the outside when cornering. However the chirping/squealing suggests a rotating part or at least metal on metal.

That's what confuses me....does not sound like a bearing....quiet the rest of the time. Reminds me a bit of a prop uj.....so poss cv joint?

What about the brakes...looking the pads are low....could something of fallen off....cannot stop noise by apply brake.

Originally Posted by Stuart02

Not something simple like the brake rotor shield catching? That's a pretty awful noise

A stone caught between the shield and rotor? However I'd expect to always hear it, not just on bumps.

Maybe time to pull the wheel off and have a peek,