RRS Lower Control Arms
		
		
				
					
					
				
				
		
			
				
					My 2007 RRS has now covered 204,000km and I am going to have to let the moths out of the wallet and spend some money on the suspension.  Everything is original in the car as it was built.
I am going to order a new Meyle lower control arm kit but am thinking what else I should get at the same time.
While not doing the upper arms at this time I am thinking of also replacing the top ball joints as they are cheap and may have got a bit of a shaking around with worn lower control arms.
Also thinking of new steering rack tie rod ends.
My left front inner CV boot needs replacing but I have one ready to go.
Wheel bearings are still original but there is no evidence of upcoming failure so I would leave these at the moment, front brakes and disks are relatively new so are OK.  Air bags and shocks are original but again there is no indication of them failing but the rear shocks are gone but that is for another day.
So looking for suggestions what else I should consider replacing at the same time as doing the front lower control arms?
				
			 
			
		 
			
				
			
				
			
			
				REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101 
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
			
			
		 
	
Bookmarks