As the system is meant to maintain height with only 3 height sensors working, albeit without fine adjustments, I wonder if the out of range condition occurred after the suspension lowered rather than triggering the lowering and therefore the air-spring or the corner valve could be leaking. Have you sprayed soapy water all around the air-spring? As leaks mostly occur at the folds, raising to off-road height before spraying is indicated.
PS Theoretically the heights should be recalibrated after fitting a new sensor or even just refitting after removal but its not critical if not calibrated.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Bookmarks