Thread: inline Fuel Pump TD6

Originally Posted by harlie

I've quoted from another thread because this was off topic. Start new thread so it can be found...




Fraser, Any chance you have a link to the cheap fuel pump?

This morning went to start Rangie in the garage, spins nicely but no attempt to fire. Tank is nearly empty (light must be nearly on). Ran perfectly yesterday.

Read faults. I have – Low side fuel pressure sensor plausible ....... insufficient for cranking (or something to that effect). Reading this experience a bung inline fuel pump? Change filter as well?

Also have a Fan Clutch fault but that can wait.

Harlie, This was the one, item #170781469085.
I have since let it run low, and it has started fine, but I am expecting to have to change the in-tank pump too, but will get around to it a bit later, as it is needed to transfer fuel from one side to the main pick-up side. I'm thinking maybe the non-return valve in the old in-line pump may have been allowing leak-back, and it would then be trying to pump air (which they can't do) I have ordered a replacement pump for the tank and am awaiting it's arrival (it was US$115 from memory)...will keep you posted

Cheers,
Fraser

PS. What fan has a clutch Harlie?
I need a new Auxilliary Fan for mine before summer for the aircon, am trying to source just a motor from the US as the original ones are insanely priced!

Ordered - Thanks mate.

Originally Posted by fraser130

...

PS. What fan has a clutch Harlie?
....

hahaha beats me. engine ecu has 3 faults. 2 about low side fuel pressure and 3rd, something about Fan Clutch Open circuit .

Just an FYI follow-up

Replaced the inline fuel pump and the car started straight up. All faults gone.

Originally Posted by fraser130

Cheers,
Fraser

PS. What fan has a clutch Harlie?

The radiator fan.

Originally Posted by Daniel

The radiator fan.

I thought that was just a viscous unit? There is an electric fan as well, but I'm not sure if this is for engine cooling or for the AC condenser.

Yes, Gav the main engine fan is a viscous unit.

That's an electrically operated unit that changes the viscosity of the fluid and acts just like a clutch to engage and disengage the fan. It's more than just a simple temp reactive fluid these days.

It relies on inputs from the engine ECU regarding air temp, engine temp, vehicle speed, engine speed and probably a whole bunch more inputs as well. It (ECU) then decides whether to trigger the fan clutch or not.

The electrically powered fan(s) is/are for airflow through the AC condenser system.

Clear as mud? Yep, it was for me too initially. There's a fairly good writeup in RAVE, from my ailing memory.

Anyway this thread was about the inline pump (and related errors). Sorry for the brief hijack.

Cheers,
Iain

Thanks for that - I don't suppose you know why it has a mind of its own do you? Sometimes it stays on all the time, even first thing in the morning, it only seems to go off once every few weeks for a few days, then back to its old self. PITA as it makes a heap of noise, and buggers the fuel economy up by nearly 1L/100.

Nope, Sorry Gav, I can't explain why yours seem to be that stroppy.

Mine's a little sporadic. I do notice it kicks in just after start but then seems to disengage after a minute or so. Particularly on these chill mornings/days. Nowhere near as badly as your unit seems to be though.

I don't think these things were ever really able to cope with our very hot climate. They seem to run continuously in anything over 25deg ambient temp.

Which in the UK or northern Europe would probably only be for about for one month out of twelve. Not sure the programming is really up to scratch particularly for the earlier model years. Nor perhaps the viscous fan hardware itself.