Results 1 to 10 of 10

Thread: Drivers side rear window regulater removal

  1. 19th February 2013, 02:01 PM #1
    BRUMMY
    BRUMMY is offline Master
    Join Date
    Feb 2009
    Location
    Bondi
    Posts
    167
    Total Downloaded
    0

    Drivers side rear window regulater removal

    Hi Everyone
    My rear drivers side electric window has ground to a crunching halt.Grinding noises came from it and the window would only go half way up..(in the rain of course)
    After pulling the door card off I mananged to get the window up with the help of a piece of wood...
    It does not look to complicated to replace except I cant get to the upper bolts,they are behind the glass,any tricks to doing this.
    Cheers Paul
    Reply With Quote Reply With Quote
  2. 19th February 2013, 05:30 PM #2
    Homestar's Avatar
    Homestar
    Homestar is offline Super Moderator & CA manager Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,105
    Total Downloaded
    0
    Does - or can - the glass come out first? Failing that, leave the lump of wood there...
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.
    Reply With Quote Reply With Quote
  3. 25th February 2013, 01:38 PM #3
    BRUMMY
    BRUMMY is offline Master
    Join Date
    Feb 2009
    Location
    Bondi
    Posts
    167
    Total Downloaded
    0
    The glass is in its runners, attached to the regulator by one torqe screw.I'm thinking if I remove that then the glass will drop down and I can then get to the upper screws.I dont want to start anything I cant finish.....The regulator has to come from the UK, no stock in Australia.
    The lump of wood is still there and holding well.......ha ha
    Reply With Quote Reply With Quote
  4. 25th February 2013, 09:04 PM #4
    Laurie's Avatar
    Laurie
    Laurie is offline Master Subscriber
    Join Date
    Mar 2007
    Location
    Canberra
    Posts
    793
    Total Downloaded
    0
    Brummy
    Are these guides any help ?


    Laurie
    Last edited by Laurie; 5th June 2013 at 06:06 AM.
    Reply With Quote Reply With Quote
  5. 12th March 2013, 12:46 PM #5
    BRUMMY
    BRUMMY is offline Master
    Join Date
    Feb 2009
    Location
    Bondi
    Posts
    167
    Total Downloaded
    0

    Window regulator

    Thanks Laurie.That made it so much easier.
    Paul
    Reply With Quote Reply With Quote
  6. 10th April 2013, 10:22 AM #6
    BRUMMY
    BRUMMY is offline Master
    Join Date
    Feb 2009
    Location
    Bondi
    Posts
    167
    Total Downloaded
    0

    Door handle cable fitting

    Thanks Laurie for the glass removal instructions.
    Do you have the procedure for refitting the door handle on the same door, I dont have any knuckles left.....and still the handle wont work.
    Cheers Paul
    Reply With Quote Reply With Quote
  7. 11th April 2013, 06:39 PM #7
    Laurie's Avatar
    Laurie
    Laurie is offline Master Subscriber
    Join Date
    Mar 2007
    Location
    Canberra
    Posts
    793
    Total Downloaded
    0
    Brummy
    Sorry it took a while ! been in Sydney. Is this enough or do you need more ?

    Laurie
    Reply With Quote Reply With Quote
  8. 11th April 2013, 06:45 PM #8
    Laurie's Avatar
    Laurie
    Laurie is offline Master Subscriber
    Join Date
    Mar 2007
    Location
    Canberra
    Posts
    793
    Total Downloaded
    0
    Here it is.
    Last edited by Laurie; 5th June 2013 at 06:06 AM.
    Reply With Quote Reply With Quote
  9. 12th April 2013, 11:14 AM #9
    BRUMMY
    BRUMMY is offline Master
    Join Date
    Feb 2009
    Location
    Bondi
    Posts
    167
    Total Downloaded
    0

    Interior door handle fitting R/H rear

    Hi Laurie
    Thanks for the pdf, its actually the interior R/H rear door.I cant get the cable to fit back onto the interior door handle.
    It came off easy when I took the door card off,but reattaching it to the handle has me stumped...
    Cheers Paul
    Reply With Quote Reply With Quote
  10. 12th April 2013, 12:57 PM #10
    Laurie's Avatar
    Laurie
    Laurie is offline Master Subscriber
    Join Date
    Mar 2007
    Location
    Canberra
    Posts
    793
    Total Downloaded
    0
    Brummy does this help ?

    Laurie
    Last edited by Laurie; 5th June 2013 at 06:06 AM.
    Reply With Quote Reply With Quote
« Electrical issues - I think... | High lift jack use »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!