Reply With QuoteI'm not sure how it will go, be interested to hear.
Most leak through the swivel seals, unlike the rears (or P38) the top plate of the front bags rotates back and forth to allow for steering. This is the week link.
Master
Am thinking of putting tyre sealant in my front airbags as budget cannot stretch to new ones at this time.I did it once on a p38 and it held for a while.Has anyone done this?Im looking at removing them,injecting "slime" or similar and replacing them.Any thoughts will be appreciated.
Wizard
SupporterI'm not sure how it will go, be interested to hear.
Most leak through the swivel seals, unlike the rears (or P38) the top plate of the front bags rotates back and forth to allow for steering. This is the week link.
L322 3.6TDv8 Lux
Master
What happens if the sealant gets back to your valve block? Air dryer?
Master
Don't know,can't even find them on the l322
AT REST
How does 50 mls of sealant feel at high speed to the face
ForumSage
Different airbag.Originally Posted by THE BOOGER
How does 50 mls of sealant feel at high speed to the face
Master
Wondered what that was all about.Should have said air SPRING.My bad.How does 50 mls of sealant feel at high speed to the face
AT REST
That's better thanksdon't have them fancy bits on my series or d1
don't have the other airbags either
Master
Where is the valve block?I think the pump is under the spare wheel?
Fossicker
From back to front....
Air compressor in the mushroom under the spare wheel,
Pressure relief valve in right side spare wheel compartment,
Rear springs valve block over right rear wheel arch,
Air tank (skinny tubular thing) under right side sill,
Front Valve behind (rear) right front wheel arch behind the plastic shield, and
Air Sus. ECU behind left side dash end panel.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks