Thread: Cargo Barrier

Originally Posted by CSBrisie

All,
is there a decent cargo barrier to suit a late model L322? Or am I stuck with the dog guard? If the latter (better than nothing), where is best place to source (over the net is fine)? British Parts of Utah look attractive at around $300 deliverd to the door (post code 4000); Traval in Uk is $350 to Brisbane.

cheers

I think Travall.com.au would be the best choice, is it $350 including delivery costs?

Originally Posted by landroverguy

I think Travall.com.au would be the best choice, is it $350 including delivery costs?

Just jumped on Travall to order the $350 Safety plus pack (Cargo barrier, Dog divider & rubber mat) for the Disco4 and they quoted $585 for delivery to Brisbane (Delivery $235)... Ouch!


MY14 Discovery 4, 7 seater TDV6.

lol, I guess the items are pretty heavy.

Land Rover make a full height barrier that is intended to be used with the regular cargo blind (part number VUB503890).

While this means that there is a break in the mesh to allow the cargo blind to fit, this is below the height of the rear seats.

Sorry for the image, it's the only one I could find at short notice.

This wouldn't be a cheap alternative though. It's about 500AUD before you add shipping AND as mentioned it is heavy!

Happy hunting,
Iain

No, I was after exactly what was in the picture below....will ask Australs Brisbane how much and will post.
cheers

Land Rover Dealer quote:

You will be looking at $790 inc, part only. Ex UK – 2/3 weeks.

cheers

In my previous RR-- soft dash LSE/TD5 I made an alloy barrier that consisted of a tube "loop"bolted at floor and roof level and fitted 3 horizontal flats across level with and above seat height.
It was unobtrusive in rear view; went with the car; pity it didn't fit the L322!
I no longer have ready access to (my then) aluminium workshop!!! Pity
I had also made alloy bull bar;side steps;full length roof rack; extra fuel and water tanks; etc; etc.
The "air bag compatible" bull bar was approved by vehicle inspector as it incorporated the original crush cans! (Lucky?)

Originally Posted by RangieBit

Land Rover make a full height barrier that is intended to be used with the regular cargo blind (part number VUB503890).

While this means that there is a break in the mesh to allow the cargo blind to fit, this is below the height of the rear seats.

Sorry for the image, it's the only one I could find at short notice.

Is that the same one as this? I just saw this mentioned on the FullFatRR forum. Supposedly, a factory accessory but I don't know the part no.