Results 1 to 8 of 8

Thread: oil filter

  1. #1
    Join Date
    May 2006
    Location
    Ulverstone,TAS
    Posts
    1,515
    Total Downloaded
    0

    oil filter

    Have tried to get oil filter top off,but it seems to be really tight.

    Is it left hand thread to undo or right hand thread before I break it..

    Doesnt look as if its had a service for a while.

    Air/fuel/pollen filter and charcoal breather pretty mucky...

    cheers

    2014 Freelander SE TD4
    2003 Range Rover TD6
    92 disco tdi manual sold
    95 disco tdi auto gone

  2. #2
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,169
    Total Downloaded
    0
    If it's like every BMW 6 petrol engine, it has a bolt in the middle which is just a normal righty tighty.
    Regards Philip A

  3. #3
    Join Date
    Jan 1970
    Location
    Manly QLD
    Posts
    1,452
    Total Downloaded
    0
    big plastic cap, 36mm socket, right hand thread and should not be really tight, book spec is 25nm - it has a rubber O-ring.
    L322 3.6TDv8 Lux

  4. #4
    jsp's Avatar
    jsp is offline Master Silver Subscriber
    Join Date
    Apr 2007
    Location
    South Australia
    Posts
    934
    Total Downloaded
    0
    I sheared the plastic nut of the top of mne the first time I tried to change the filter.

    Ordered a new one and waited, and ended up using a piece of rubber mesh over the whole thing and then an oil filter wrench over that and lots of swearing and cracked plastic but off it came.

    I have only ever done it up hand tight since, again with a rubber mesh for a bit of extra grip.

    Just that rubber mesh stuff you use to stop things slipping around on the dash or for place mats etc.

    2007/2002/2000/1994/1993/1988/1987/1985/1984/1981/1979/1973 Range Rover 1986 Wadham Stringer
    and a Nissan Cube............
    South Australia.

  5. #5
    Join Date
    Jan 2011
    Location
    Canberra
    Posts
    96
    Total Downloaded
    0
    JSP,

    Where did you find the new top? Mine split like two pins at the end of a lane.. :/

    Regards,

  6. #6
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,105
    Total Downloaded
    0
    They are available second hand on ebay, but they are all OS. I would call the BMW dealers and ask them, I'm sure it would be a commonly kept part.
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  7. #7
    jsp's Avatar
    jsp is offline Master Silver Subscriber
    Join Date
    Apr 2007
    Location
    South Australia
    Posts
    934
    Total Downloaded
    0
    I think I got mine from island 4x4 in a box of bits I ordered to replace when I first bought the car.

    Oil Filter Top Cover LPX000070 Island 4x4 - Specialists in Land Rover and Range Rover Parts and accessories for all models. UK and worldwide mail order.

    2007/2002/2000/1994/1993/1988/1987/1985/1984/1981/1979/1973 Range Rover 1986 Wadham Stringer
    and a Nissan Cube............
    South Australia.

  8. #8
    Join Date
    Feb 2014
    Location
    Melbourne
    Posts
    481
    Total Downloaded
    0
    I know this is digging up an oldie, but I bought a new one from ritter land rover, was delivered to me for a very very reasonable price...as I always do, check the dealers first for parts, not always expensive

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!