Thread: Can I run these wheels on an 08 RRTDV8

If they fit they should be fine.
The offset should be the same
the tyre size should be the same
best way to find out is try

Originally Posted by chaybra

If they fit they should be fine.
The offset should be the same
the tyre size should be the same
best way to find out is try

Thanks. I should have mentioned that the original rims looked just like these ones I've just purchased off eBay (ie 7spoke & 20") except the originals don't have the "drilled holes" next to 5 stud holes. Don't know if that has any significance to wheel stability or something else?

If they are Land Rover wheels, the offset will be embossed on the wheel, probabaly on the back, something like 57mm

Originally Posted by p38arover

If they are Land Rover wheels, the offset will be embossed on the wheel, probabaly on the back, something like 57mm

Thanks. The wheels are stamped on the back "Land Rover" and "Made in Austria" also stamped 8.5J x 20. There are a lot of other numbers but I have no idea what they mean. Forgive my ignorance, but what's the offset mean & how does it affect the driving or steering of the vehicle?

I have just put 20" on my 2007 tdv8 with brembo's, they are 20x9 with an offset of 50, fit fine. Original 19" have an offset of 53 so the lower the offset the more the wheel will sit outwards into the wheel arch. As long as your offset is 53 or lower it should be fine.
I have 275 45 tyres and also no issues, had some 295 on for a few days and they were also fine.
Cheers

L320 RRS has 20x9" with 53mm offset whereas L322 RRV has 20x8.5" with 57mm offset standard.

Originally Posted by Graeme

L320 RRS has 20x9" with 53mm offset whereas L322 RRV has 20x8.5" with 57mm offset standard.

Graeme
Does the narrower rim with inc offset on the L322 mean the wheel sits in much the same spot as a RRS?

Originally Posted by p38arover

If they are Land Rover wheels, the offset will be embossed on the wheel, probabaly on the back, something like 57mm

There are quite a few series of numbers stamped on the back ... can't see a "58" but there is an "IS 58" stamped on one spoke. Would that be the offset and if it is ...is it still okay to use the wheel ?