Reply With QuoteIs that an ARB rack that you've fitted?
I considered a D2 spare wheel holder for my roof rack mounted spare but there's no way I could lift the spare up and over. I'm using a Y-shaped tiedown strap.
Fossicker
SupporterHi,
Finally finished making and mounting the roof rack.
Used 12mm thick steel plate and 5mm plate for top. It was bolted down using u bolts and a single bolt at the rear end.
You can see in the pictures. This project about $70 to make. Got drawing and measurement to make proper instructions later.
Sent from my GT-I9505 using AULRO mobile app
Jason
Range rover l322 2002 TD6
Major part of the heart and soul of AULRO.comIs that an ARB rack that you've fitted?
I considered a D2 spare wheel holder for my roof rack mounted spare but there's no way I could lift the spare up and over. I'm using a Y-shaped tiedown strap.
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
Fossicker
SupporterHi p38
I got the rack of gumtree in hobart from d2 owner who hot the proper rhino rack he was after.
Yes l used the disco spare wheel carrier and added a stud to the wheel stud pattern. And used hose clamps to the rack, keep it simple.
Sent from my GT-I9505 using AULRO mobile app
Jason
Range rover l322 2002 TD6
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks