Results 1 to 7 of 7

Thread: Suspect TD6 injector wiring harness

  1. #1
    Join Date
    Feb 2014
    Location
    Melbourne
    Posts
    481
    Total Downloaded
    0

    Suspect TD6 injector wiring harness

    so, I noticed this morning a very slight vibration from my usually silky smooth td6. Immediately im suspecting the injector harness as the fault.

    I turned on the IID tool and found the cyl 1 and 2 were not being normal in the fuel rates at idle, then #2 began to flick between normal and abnormal depending on direction i was turning and bumps etc.

    anyone had experience with replacing (I have exposed previously and know it wont be difficult) and where was their source for a new harness?

    Pic shows abnormal values...slightly blurry, my bad
    Attached Images Attached Images

  2. #2
    Join Date
    Feb 2014
    Location
    Melbourne
    Posts
    481
    Total Downloaded
    0
    After shopping around on the net, i didnt want to pay over $250 for a used let alone new harness...obviously. I started at looking at getting plug etc and making one.

    I decided to see what the ULR could get one in for, i have had luck in the past with some bits being cheap and some not so.

    for a total price including next day delivery to my house....$97

    check back tomorrow for more updates.

  3. #3
    jsp's Avatar
    jsp is offline Master Silver Subscriber
    Join Date
    Apr 2007
    Location
    South Australia
    Posts
    934
    Total Downloaded
    0
    I have done two now.

    they are fairly cheap - last one I bought was $75!

    quick and easy to fit. Mine have gone brittle around the plugs. Runs like a bucket of bolts when they go bad.

    2007/2002/2000/1994/1993/1988/1987/1985/1984/1981/1979/1973 Range Rover 1986 Wadham Stringer
    and a Nissan Cube............
    South Australia.

  4. #4
    Join Date
    Feb 2014
    Location
    Melbourne
    Posts
    481
    Total Downloaded
    0
    Hmm, i put it in this morning, hey presto all good....for about 150kms...

    I have read some other people have had bad ones out of the box after short periods, ill have to look into this more tho.

  5. #5
    Join Date
    Feb 2014
    Location
    Melbourne
    Posts
    481
    Total Downloaded
    0
    All sorted!

    Replace #1 injector with a very very cheap BMW one off fleebay
    I was expecting this "flow tested" one to be a waste of money...but 3 for $80, it was worth a crack.

    Also, bmw ones fit no problem as expected.

  6. #6
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    How many kms?

    Jc
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  7. #7
    Join Date
    Feb 2014
    Location
    Melbourne
    Posts
    481
    Total Downloaded
    0
    Quote Originally Posted by justinc View Post
    How many kms?

    Jc
    up to 230k now! I pack em on, started at 150

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!