Results 1 to 5 of 5

Thread: Coolant hose connection assembly

  1. 18th September 2019, 06:15 AM #1
    Mickd
    Mickd is offline Fossicker
    Join Date
    Feb 2019
    Location
    Brisbane
    Posts
    26
    Total Downloaded
    0

    Coolant hose connection assembly

    Has anyone here had any experience in replacing the coolant hose connection assembly at the rear of the TDV8 engine? I have a very slight leak from that area that pools at the rear of the engine block over several weeks and then dribbles down the side of the transmission. Looks like the plastic connection assembly has a very slight leak on the welded plastic seam. I thought I was going to find a slight leak in the thermostat area, but it just appears to be this connection assembly.

    I've pulled off most of the things I need to access already, such as the wiring clips, LH heat shield and injector wiring. Haven't removed the intake manifold as I'm thinking I could potentially do this without removal of that. The number of hoses and clamps going onto the assembly though...

    Item 11. Circled in red is what I'm talking about
    Screen Shot 2019-09-18 at 7.06.03 am.jpg
    Reply With Quote Reply With Quote
  2. 18th September 2019, 09:37 AM #2
    Laurie's Avatar
    Laurie
    Laurie is offline Master Subscriber
    Join Date
    Mar 2007
    Location
    Canberra
    Posts
    793
    Total Downloaded
    0
    Mick
    Can you ID the pipe from this diagram ?

    This page comes from this site ! very handy for naming and finding part numbers. The diagram is 06-09 Production run.302ABIA.png

    new.lrcat.com

    Laurie
    Reply With Quote Reply With Quote
  3. 18th September 2019, 10:33 AM #3
    p38arover's Avatar
    p38arover
    p38arover is online now Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!     Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,728
    Total Downloaded
    1.63 MB
    Crikey! I thought the L322 BMW M62 V8 petrol was bad!
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever
    Reply With Quote Reply With Quote
  4. 18th September 2019, 05:27 PM #4
    Mickd
    Mickd is offline Fossicker
    Join Date
    Feb 2019
    Location
    Brisbane
    Posts
    26
    Total Downloaded
    0
    It's the plastic assembly as part of the 8260 group. I've actually just bought the replacement part (8260) which includes a number of short hoses attached to it. I think I might be able to replace it without removing the entire intake. If not, I'll consider renewing the lot while I have it torn down.
    Reply With Quote Reply With Quote
  5. 18th September 2019, 07:23 PM #5
    rar110's Avatar
    rar110
    rar110 is offline ForumSage Subscriber
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    I wonder if the EGRs and related cooling hoses were removed, could a couple of brass T-pieces replace that plastic part?
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137
    Reply With Quote Reply With Quote
« What’s that noise? | New booties 😁 »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!